GMP requires product contact surfaces not to react with, add to or absorb from the product. In practice SS 316L is the standard for product contact parts because its molybdenum content improves corrosion resistance and its low carbon suits welding; SS 304 is used for frames, panels and non-contact parts; special alloys such as Hastelloy are used for aggressive chemicals; and polymers and elastomers (PTFE, silicone, EPDM, FKM) must be compliant with FDA food contact rules or USP Class VI where required. Ask for traceable material certificates for every contact part.
The GMP requirement
Under 21 CFR 211.65, equipment surfaces that contact components, in-process materials or drug products must not be reactive, additive or absorptive so as to alter product quality. WHO GMP sets the same principle. Material choice is how a supplier meets it.
Where each material is used
| Material | Typical use | Why |
|---|---|---|
| SS 316L | Product contact parts: bowls, hoppers, chutes and guides, vessels, piping | Molybdenum improves corrosion resistance; low carbon reduces weld sensitisation |
| SS 304 | Frames, panels, covers, non-contact parts | Good corrosion resistance at lower cost |
| Duplex steels and nickel alloys (such as Hastelloy) | Chlorides, strong acids, aggressive solvents | Higher corrosion resistance |
| Tool steels with coatings | Tablet punches and dies | Hardness and wear; coatings reduce sticking |
| PTFE, PEEK, UHMW-PE | Guides, scrapers, valve seats | Low friction, chemical resistance |
| Silicone, EPDM, FKM | Gaskets, seals, tubing | Chosen by temperature and chemical compatibility; compliant grades |
Certificates and checks
- EN 10204 3.1 mill certificates for 316L contact parts, traceable by heat number.
- Positive material identification on critical parts where risk justifies.
- Declarations for polymers and elastomers: FDA 21 CFR 177 food contact, USP Class VI where required, and animal origin (TSE/BSE) statements.
- Surface finish records; see surface finish.
- Passivation records for stainless steel after fabrication.
- Lubricant declarations for incidental contact (food-grade H1).
Companies listed in the Hello Pharma supplier directory
The Hello Pharma supplier directory lists 45 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.
Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.
SS fabrication (26)
Swiss Engineering Pvt Ltd; Allyone Industries; Chemi Plant Engineering Company; Cintex Industrial Corporation; Darshana Industries Pvt. Ltd.; G T Metals & Tubes; HLE Engineers Pvt. Ltd.; Hugopharm Technologies Private Limited; Kaps Engineers; Kinam Engineering Industries; Komal Industries; Mistry Engineering; N. K. Industries; Neptune Industries; Pharma Fab Industries; Shah Brothers; Shefa Industries; Sheth Fabricators Pvt. Ltd.; Sterinox Systems; Taskar Engineering; Tex Mech Engineers; Trimech Engineers Pvt. Ltd.; Universal Orbital Systems Pvt. Ltd.; Vats & Vessels (I) Pvt Ltd; Vishwakarma Industries; Vyanktesh Fabricraft Pvt. Ltd..
Open the full entries: Process plant equipment list filtered to ss fabrication · Oral solid dosage equipment list filtered to ss fabrication
Gaskets, seals and hoses (19)
GMM Pfaudler Ltd.; Ami Polymer Pvt Ltd; Bharat Rubber Works Pvt Ltd; Elasto-Tech Industries Pvt Ltd; Elesa And Ganter India Pvt Ltd.; Himsan Polymer; Hitech Applicator; Igus India Pvt Ltd; Jetspray Solutions; Premium Polymers Limited; Rahul Ferromet & Engg. Pvt. Ltd. (Rensa Tubes); Raj Electricals (Webflex); Shree Gaurav Rubber Products; Spraying Systems (India) Pvt. Ltd.; Staubli Tec Systems India Pvt Ltd; Techline Industries; UD Pharma Rubber Products; Unigasket India Pvt. Ltd.; Vijay Engineering Corporation.
Open the full entries: Components and spares list filtered to gaskets, seals and hoses · Process plant equipment list filtered to gaskets, seals and hoses
Frequently asked questions
Why is SS 316L used instead of SS 304 for contact parts?
316L contains molybdenum for better corrosion resistance, especially against chlorides, and low carbon to reduce weld corrosion, which suits cleaning agents and pharmaceutical products.
Can SS 304 be used for any product contact?
Sometimes for low-risk, non-corrosive applications if justified, but 316L is the industry standard for product contact.
What certificate proves the steel grade?
An EN 10204 3.1 inspection certificate from the mill, traceable to the part through heat numbers.
Which rules apply to gaskets and seals?
Typically FDA food contact regulations (21 CFR 177) and, for many pharmaceutical uses, USP Class VI biocompatibility, plus chemical compatibility testing.
Related guides
Sources
- 21 CFR Part 211, Subpart D Equipment, eCFR
- WHO GMP main principles (TRS 986, Annex 2), WHO
- ASME BPE overview, Alfa Laval
- Understanding BPE standards and surface finishes, Rodem
This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.
