Oral Solid Dosage Equipment: Tablet Presses, Granulation, Coating and Capsule Filling

Tablets and capsules are made on a chain of machines that must work together: granulation, drying, milling, blending, compression or encapsulation, and coating. This section explains how to choose each one, compares the main options, and covers the machine-side causes of common quality problems.

20 guides · By the Hello Pharma Editorial Team · Last updated 19 November 2026

Equipment choice in oral solid dosage depends on the process route. Direct compression needs good powder flow and accurate blending; wet granulation adds a granulator, a dryer and a mill; dry granulation replaces liquid binder with a roller compactor. The route sets which machines you need and how they connect.

The guides below compare single and double rotary presses, fluid bed and tray dryers, blender types and coating systems, and explain output speeds, containment for potent drugs, bilayer and effervescent tablets, and how to separate machine problems from formulation problems.

All 20 guides in this section

Guides marked coming soon are being published in batches; this page links to each one as it goes live.

Find suppliers

Companies in the Hello Pharma supplier directory that match this section.

Frequently asked questions

What is the difference between wet granulation, dry granulation and direct compression?

Wet granulation binds powders with a liquid, then dries and mills the granules; it suits poorly flowing or low-dose blends. Dry granulation compacts powder into ribbons or slugs and mills them, which avoids heat and moisture. Direct compression presses a blended powder without granulation; it needs fewer machines but demands good flow and compressibility.

How is tablet press output calculated?

Rated output per hour is the number of stations multiplied by turret speed in revolutions per minute, by the number of compression points per revolution (one on a single-sided press, two on a double-sided press) and by 60. Real output is lower because of changeovers, start-up, weight adjustments and stoppages, which is why overall equipment effectiveness matters more than rated speed.

What are the tooling standards for tablet punches and dies?

The two main standards are EU tooling (also called Euronorm, covered by ISO 18084) and TSM tooling, which is common in North America. Both include B, D and BB sizes. Tooling must match the press design, so the standard is fixed when the press is bought.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.