A deduster removes loose powder and burrs from tablets leaving the press; a pharmaceutical metal detector then checks each tablet for ferrous, non-ferrous and stainless steel contamination and rejects any that fail. They are usually installed in line at the press outlet, often as one combined unit. Specify detection sensitivity as the smallest test sphere of each metal type detected with your product, check throughput at your tablet size, and insist on a fail-safe reject, tool-free cleaning and qualification documents.
Why both are used
- Deduster: removes dust and edges so tablets are clean for coating, packing and inspection, and reduces dust spread.
- Metal detector: catches metal from worn punches, dies, feeder parts, screens or upstream equipment. Stainless steel fragments from tooling are the main concern.
Common inline layouts
| Layout | Advantages | Points to check |
|---|---|---|
| Press → deduster → metal detector | Clean tablets reach the detector; most common | Height and footprint at the press outlet |
| Press → metal detector → deduster | Detector right at the press | Dust may affect detector housing; cleaning |
| Combined deduster and detector unit | Compact, one validation, dust-tight | Compatibility with your press outlet |
| Plus capsule polisher | Same principle for capsules | Handling of soft or sticky capsules |
How sensitivity is specified
Metal detector sensitivity is expressed as the diameter of the smallest test sphere of a given metal (ferrous, non-ferrous, stainless steel) that is reliably detected, normally measured at the centre of the aperture. Stainless steel is the hardest to detect, so its figure is usually the largest. Ask suppliers for sensitivity figures measured with your product passing through, not in air alone, and check the reject mechanism is tested with test pieces at start-up and at set intervals.
Selection checklist
- Throughput at your tablet size: published flow rates drop sharply as tablet size increases.
- Sensitivity for ferrous, non-ferrous and stainless steel with your product.
- Fail-safe reject with confirmation, reject bin and alarm.
- Dust-tight construction, 316L contact parts, tool-free dismantling.
- Deduster type: vertical spiral or horizontal; with or without lift; burr removal and gentle handling for coated or fragile tablets.
- Data logging, audit trail and test reminders.
- IQ and OQ documents from the supplier.
Companies listed in the Hello Pharma supplier directory
The Hello Pharma supplier directory lists 24 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.
Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.
Checkweighers and metal detectors (3)
Technofour Electronics Pvt Ltd; Campbell Electronics; Vandana Electronics (Pharma Packaging Solutions).
Open the full entries: Automation, inspection and serialization list filtered to checkweighers and metal detectors · Packaging machinery list filtered to checkweighers and metal detectors
Tablet presses (21)
ACG Worldwide Solid Dosage Consumables and Machinery; Cadmach Machinery Co. Pvt Ltd; Concept Engineering; Fluidpack; Karnavati Engineering; Parle Global Technologies Pvt. Ltd.; Prism Pharma Machinery; Solace Engineers (Mktg) Pvt. Ltd.; Accura Pharmaquip Pvt Ltd; Dumra Machines; Grovers International; Helios Concrew Machines; Imperial Pharmachines Pvt Ltd; Kothari Pharma Technologies Private Ltd.; Kunal Machines; LE - Born Technomech; NEO Machine Mfg Co LTD; Omega Pharma Machinery; Propix Technologies Pvt Ltd; Richards Industries; Saimach Pharmatech Pvt. Ltd..
Open the full entries: Oral solid dosage equipment list filtered to tablet presses
Frequently asked questions
Is a metal detector mandatory for tablets?
Requirements vary by market, but metal detection is standard practice and inspectors expect controls against metal contamination. Most OSD plants fit one to every press.
Should the deduster come before the metal detector?
Usually yes, so clean tablets reach the detector. Combined units place both in one compact, dust-tight housing.
Why is stainless steel hard to detect?
Austenitic stainless steel is non-magnetic and a poor conductor, so it produces a weaker signal than ferrous or non-ferrous metals of the same size.
How often should a metal detector be tested?
At start-up, at set intervals during production and at the end, using certified test pieces, as defined in your procedures.
Related guides
Sources
- CEIA tablet metal detectors, LabWrench
- Dust-tight metal detector for tablets, CEIA (Making.com)
- Cassel metal detector specifications
- Metal detector MD, ACG Worldwide (DirectIndustry)
- Performer Pharma Elite, Bunting
This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.
