Buyer's guide · Oral solid dosage

Bilayer Tablet Press Selection Guide

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Bilayer tablets are made by filling and lightly tamping the first layer, then filling the second layer on top and compressing both. The hardest problems are layer separation, accurate weight control of each layer, and cross-contamination between layers. Choose a purpose-built bilayer press with low first-layer force, individual layer weight monitoring (force- or displacement-based) with first-layer sampling, good fines removal between layers, and enough upper punch penetration and dwell time.

The three core challenges

  • Layer separation (delamination): if the first layer is compressed too hard, its surface is too smooth and dense to bond with the second layer.
  • Individual layer weight: standard force-based weight control works poorly at the low forces used on the first layer.
  • Cross-contamination: fines from the first layer can smear on the die table and carry into the second layer.

Suppliers note that modified single-layer presses often struggle with these issues under GMP and at high output, so purpose-built bilayer machines are preferred for commercial production.

Press features that matter

FeatureProblem it solves
Low, controlled first-layer tamping forceKeeps first layer rough enough to bond
Sensitive force transducers or displacement (height) measurement at the first layerAccurate first-layer weight control at low force
First-layer sampling and automatic weighingVerifies each layer weight separately
Sufficient upper punch penetrationMakes room in the die for the second layer fill
Fines extraction and clean scrape-off between feedersReduces layer cross-contamination
Longer dwell at pre-compressionAdequate hardness at high turret speeds
Separate feeders and hoppers per layerIndependent flow control

Example bilayer-capable presses

  • IMA Prexima 800: published at up to about 1,044,000 bilayer tablets per hour.
  • Syntegon TPR 200: flexible turrets with independent monitoring of each layer's weight, up to about 230,000 tablets per hour.
  • GEA presses using displacement-based layer weight measurement at low force.
  • Fette, KORSCH and ACG also offer bilayer configurations; see our high-speed press guide.

Formulation tips that make the press work

  • Keep fines low in both layers, especially the first.
  • Put the lighter-density layer first if upper punch penetration is limited.
  • Match the compression behaviour of both layers as far as possible.
  • Develop on a press or compaction simulator that can reproduce the commercial layer sequence; see our R&D press guide.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 21 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Tablet presses (21)

ACG Worldwide Solid Dosage Consumables and Machinery; Cadmach Machinery Co. Pvt Ltd; Concept Engineering; Fluidpack; Karnavati Engineering; Parle Global Technologies Pvt. Ltd.; Prism Pharma Machinery; Solace Engineers (Mktg) Pvt. Ltd.; Accura Pharmaquip Pvt Ltd; Dumra Machines; Grovers International; Helios Concrew Machines; Imperial Pharmachines Pvt Ltd; Kothari Pharma Technologies Private Ltd.; Kunal Machines; LE - Born Technomech; NEO Machine Mfg Co LTD; Omega Pharma Machinery; Propix Technologies Pvt Ltd; Richards Industries; Saimach Pharmatech Pvt. Ltd..

Open the full entries: Oral solid dosage equipment list filtered to tablet presses

Frequently asked questions

Why do bilayer tablets separate?

Usually because the first layer was compressed too hard, giving a dense, smooth surface that does not bond with the second layer, or because the layers expand differently after compression.

How is first-layer weight controlled?

By measuring tamping force with sensitive transducers or by measuring first-layer height (displacement), combined with sampling and weighing of first-layer compacts.

Can a standard press be converted for bilayer?

Some can, but suppliers note modified presses often struggle with layer weight control, separation and cross-contamination at commercial output.

How is cross-contamination between layers reduced?

Minimise fines, ensure clean scrape-off of the die table between feeders, and use effective dust extraction.

Related guides

Sources

  1. Making bilayer tablets, GEA
  2. Bi-layer tablets: the GEA way
  3. Navigating the complexities of bilayer tablet manufacturing, ACG
  4. Key considerations in multilayer tableting, Pharmaceutical Technology
  5. Multilayer-tablet technology, Pharmaceutical Technology
  6. Tablets & Capsules, March/April 2021 (Prexima 800, TPR 200)

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.