Explainer · Oral solid dosage

Tablet Press Output Speeds: What to Expect from Mid-Range Machines

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Rated output = number of stations x turret speed (rpm) x 60 x tablets per station per revolution (1 for single-sided, 2 for double-sided). A 47-station press at 120 rpm, for example, has a rated output of about 338,400 tablets per hour. Realistic output is usually much lower: products often need slower speeds for dwell time, and changeovers, cleaning, stops and rejects reduce good output further. Plan capacity on measured speed and OEE, not the brochure figure.

The output formula

Rated output (tablets/h) = stations x rpm x 60 x outputs per revolution
ExampleStationsrpmOutputs per revRated output per hour
Small single-sided press2760197,200
Mid-range single-sided press45801216,000
KORSCH XL 400 SFP (published)471201338,400
Double-sided press45602324,000
First, second and fourth rows are worked examples; the third uses published specifications.

For bilayer tablets the output per station stays the same, but speeds are usually lower for weight control and layer bonding.

Why real output is lower

  • Dwell time: the time the punch head flat spends under the roller. Faster turrets give shorter dwell, which can cause capping or soft tablets, so many products run slower than maximum. Larger punch heads (D tooling) give longer dwell than B tooling.
  • Die filling: poor flow limits speed before the press does.
  • Tablet size: large tablets need larger tooling and fewer stations.
  • Availability losses: changeovers, cleaning, tooling changes, breakdowns.
  • Quality losses: rejects and start-up waste.

From rated to realistic

  1. Find the speed at which your product makes good tablets (from trials).
  2. Recalculate output at that speed.
  3. Multiply by expected availability and quality rates (OEE without the speed factor).
  4. Compare with demand, including growth; see expanding OSD capacity.
Worked example: a 45-station single-sided press rated at 216,000/h runs your product well at 60 rpm (162,000/h). With 70% availability and 98% quality, realistic good output is about 111,000 tablets per hour, around half the rated figure.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 21 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Tablet presses (21)

ACG Worldwide Solid Dosage Consumables and Machinery; Cadmach Machinery Co. Pvt Ltd; Concept Engineering; Fluidpack; Karnavati Engineering; Parle Global Technologies Pvt. Ltd.; Prism Pharma Machinery; Solace Engineers (Mktg) Pvt. Ltd.; Accura Pharmaquip Pvt Ltd; Dumra Machines; Grovers International; Helios Concrew Machines; Imperial Pharmachines Pvt Ltd; Kothari Pharma Technologies Private Ltd.; Kunal Machines; LE - Born Technomech; NEO Machine Mfg Co LTD; Omega Pharma Machinery; Propix Technologies Pvt Ltd; Richards Industries; Saimach Pharmatech Pvt. Ltd..

Open the full entries: Oral solid dosage equipment list filtered to tablet presses

Frequently asked questions

How do you calculate tablet press output?

Multiply stations by turret rpm by 60, then by 2 for a double-sided press. This gives rated output per hour.

Why can't a press run at its maximum speed?

Many products need longer dwell time to bond properly, and dies must fill completely. Running too fast causes capping, soft tablets or weight variation.

What output should I plan for?

Use the speed proven in trials and apply realistic availability and quality rates. Real good output is often 40 to 60% of the rated figure in multi-product plants.

Does D tooling increase output?

D tooling has a larger head flat, giving longer dwell time at the same speed, but fewer stations fit on a turret of the same size, so rated output may fall.

Related guides

Sources

  1. Top high-speed tablet press models (KORSCH XL 400 data), Laafon
  2. Press adjustments help prevent tableting problems, Pharmaceutical Technology
  3. Fixing tableting problems, Pharmaceutical Technology
  4. Realistic pharma OEE benchmarks by line type, iFactory

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.