Buyer's guide · Oral solid dosage

Multimill and Sifter Selection for Pharma Granulation

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Use a conical mill (cone mill) for most granule sizing, wet and dry, because it gives a narrow size distribution with little heat and dust. Multimills (swing-hammer or knife mills common in India) are versatile and cheap, and hammer mills suit fine milling of dry, brittle material. Vibro sifters screen raw materials and granules. Choose by required particle size, wet or dry duty, capacity in kg/h, cleanability, and whether the mill can sit in line with the granulator or dryer.

Mill types compared

MillHow it worksBest forLimitations
Conical (cone) millImpeller pushes material through a conical screenWet granule sizing before drying, dry granule sizing, delumping; down to about 180 µmNot for very fine powders
Multimill (swing hammer or knife)Rotating blades with knife or impact edge against a screenVersatile wet and dry sizing; low costMore heat and fines than a cone mill
Hammer millHigh-speed hammers impact materialModerate to fine milling of dry, brittle materialNot for sticky, fibrous or low-melting materials; heat and dust
Oscillating granulatorOscillating rotor rubs material through a screenGentle sizing of dry granulesLower capacity

Screens and settings

  • Granulation work mainly uses screens from about 4 to 20 mesh; finer screens are used for milling powders.
  • Screen hole type and size, impeller profile, impeller tip speed and feed method all shape the particle size distribution.
  • Wet milling uses larger openings than dry milling of the same product.
  • Record screen and speed in the batch record; they are critical process parameters for many products.

Sifter selection

  • Vibro sifters screen raw materials before dispensing and check granules after milling.
  • Size by throughput in kg/h for the mesh used; capacity falls with finer meshes.
  • Look for tool-free mesh change, sealed decks and dust-tight lids.
  • Check mesh integrity before and after use; a torn mesh is a contamination risk.

Placement in the line

Mills can sit under the granulator discharge (wet milling into the dryer), on a lifting column over containers, or in a closed transfer route between dryer and blender. In-line mills reduce handling and dust; see our wet granulation line guide. One published mobile cone mill quotes 45 to 450 kg/h depending on screen and product.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 22 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Milling and sifting (22)

Anish Pharma Equip Pvt. Ltd; Bowman & Archer Pharma Machines (India) Pvt.Ltd; Cadmach Machinery Co. Pvt Ltd; Food & Pharma Specialities; Gansons Limited; IDEX Fluid & Metering Pvt. Ltd.; Karnavati Engineering; Prism Pharma Machinery; Saan Engineers Pvt Ltd; Solace Engineers (Mktg) Pvt. Ltd.; SSPM Systems & Engineers; Sunsai Pharma Equipments Pvt. Ltd.; Tapasya Engineering Works Pvt Ltd; AGARAM Industries; Citizen Industries; Galaxy Sivtek Pvt. Ltd.; Jamnadas Industries; Jicon Industries; M-I Enterprises (I) Pvt. Ltd. Div: Sweco India; Mechtek; Russell Finex Sieves and Filters Pvt Ltd.; Trident Equipments Pvt. Ltd..

Open the full entries: Oral solid dosage equipment list filtered to milling and sifting · Process plant equipment list filtered to milling and sifting

Frequently asked questions

What is the difference between a cone mill and a multimill?

A cone mill pushes material gently through a conical screen and gives a tighter size distribution with less heat. A multimill uses faster blades or hammers and is more versatile but makes more fines.

Which mill is used after a fluid bed dryer?

Usually a conical mill or oscillating granulator to size dried granules before blending.

What mesh size is used for granulation?

Mainly 4 to 20 mesh for granules, depending on product and stage; finer screens are used for powders.

Can a mill be connected directly to the granulator?

Yes. Many lines place a wet mill at the granulator discharge, feeding the fluid bed dryer in a closed transfer.

Related guides

Sources

  1. Conical milling for pharmaceutical manufacturers, Quadro
  2. Conical mill vs hammer mill, Quadro
  3. Classification of mills used in pharma industry, Pharmastate Academy
  4. MTM450 conical mill specifications, Senieer
  5. Pharma milling equipment: choosing mill screens, Quadro

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.