Choose a rapid mixer granulator by working batch size first: published bowl capacities are gross volumes, and the usable batch depends on bulk density and fill level. Then check impeller and chopper design, binder addition, and how the machine detects granulation end point (power consumption, calculated torque or direct torque measurement). Discharge into a fluid bed or mill, wash-in-place, containment and Part 11 capable controls complete the specification.
Bowl size and working capacity
Granulator models are named by gross bowl volume in litres. The batch you can actually run depends on bulk density and the supplier's recommended fill range. One example: a 400 litre bowl is quoted for roughly 80 to 160 kg depending on product density. A 25 litre laboratory bowl is quoted at about 11 kg at a bulk density of 0.6 g/ml.
Check that your smallest and largest batches both fall inside the working range, or plan interchangeable bowls.
Impeller, chopper and binder addition
- Impeller: three-blade designs are common; blade angle and shape decide the rope-like flow of the mass. Variable speed is essential for scale-up.
- Chopper: side-mounted, variable speed, breaks lumps and controls granule growth.
- Drive position: top-drive designs keep seals out of the product; bottom-drive designs are widespread. Ask about seal purging and cleaning.
- Binder addition: a pump with spray nozzle gives controlled droplet size and rate; pouring by hand adds variability.
- Jacketed bowl: useful for temperature-sensitive products and melt granulation.
End-point control
| Method | How it works | Limitation |
|---|---|---|
| Motor power or current | Measures load on the impeller motor | Measures motor load, not impeller torque; affected by drive losses |
| Calculated torque | Derived from power and speed | Inherits errors from current readings |
| Direct or reaction torque | Sensor measures impeller torque in Nm | Higher cost, but closer to the granule mass |
| Time and operator judgement | Fixed wet massing time, "squeeze test" | Least reproducible |
Power consumption or impeller torque remains the usual basis for end point; ask for the method, resolution and how data is recorded.
Discharge, integration and cleaning
- Side discharge valve with integrated wet mill, feeding a fluid bed dryer by gravity or vacuum transfer.
- Closed transfer to the dryer reduces dust and operator exposure; see our wet granulation line guide.
- Wash-in-place nozzles for bowl, lid and discharge.
- Explosion protection or pressure shock resistance if solvents are used.
- Controls with recipes, batch reports and audit trails.
Companies listed in the Hello Pharma supplier directory
The Hello Pharma supplier directory lists 48 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.
Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.
Granulation (48)
ACG Worldwide Solid Dosage Consumables and Machinery; Anish Pharma Equip Pvt. Ltd; Bectochem Consultant & Engineers Pvt. Ltd.; Bowman & Archer Pharma Machines (India) Pvt.Ltd; Cadmach Machinery Co. Pvt Ltd; Fabtech Technologies International Ltd.; Gansons Limited; Indo German Pharma Engineers; Parle Global Technologies Pvt. Ltd.; Prism Pharma Machinery; Saan Engineers Pvt Ltd; Solace Engineers (Mktg) Pvt. Ltd.; SSPM Systems & Engineers; Sunsai Pharma Equipments Pvt. Ltd.; Tapasya Engineering Works Pvt Ltd; Allegro Pharmachem Equipments; Ambica Engineering Works; Astro Mech; BEW Engineering Pvt. Ltd.; Bombay Pharma Equipments Pvt Ltd; Bright Pharma Engineering Private Limited; Brilliant Process Machinery Pvt. Ltd.; Brinda Pharma Technologies Pvt Ltd.; CEMACH; Dumra Machines; Gem Pharma Machineries; Glatt Group; Grovers International; Helios Concrew Machines; HLE Engineers Pvt. Ltd.; Imperial Pharmachines Pvt Ltd; Indo Rama Engineers; Laxmi Pharma Machines; LEISTUNG ENGINEERING PVT LTD; Mack Pharmatech Pvt. Ltd.; Mecwell Pharma Machinery Pvt. Ltd.; Omega Pharma Machinery; Pankaj Industries; Pharma Mech Machineries; Promp+tech Pharma Equipments (India) Pvt Ltd and 8 more.
Open the full entries: Oral solid dosage equipment list filtered to granulation · Engineering and validation services list filtered to granulation · Sterile, injectable and liquid equipment list filtered to granulation
Frequently asked questions
What does RMG stand for?
Rapid mixer granulator, another name for a high shear mixer granulator used for wet granulation.
How is granulator batch size calculated?
Multiply gross bowl volume by the supplier's recommended fill fraction and the bulk density of the blend. For example, a 400 litre bowl is quoted for about 80 to 160 kg depending on density.
Which end-point method is best?
Direct impeller torque measurement is closer to the granule mass than motor power, but motor power is cheaper and widely used. The key is a consistent, recorded method.
Should the granulator connect directly to the dryer?
For most commercial lines, yes. A closed transfer through a wet mill to the fluid bed dryer reduces dust, handling and cycle time.
Related guides
Sources
- High shear machines: end point and bowl capacities, Frain Group
- How to determine an accurate endpoint of high-shear mixer granulation, Manufacturing Chemist
- Thermal effusivity and power consumption for granulation end point, Pharmaceutical Technology
- GM400 high shear mixer granulator capacity, Senieer
- Gral and UltimaGral high shear granulators, GEA
This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.
