Comparison · Oral solid dosage

Fluid Bed Processor for Pellet Coating: Wurster, Top and Tangential Spray

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Bottom-spray Wurster coating is the standard for pellet and mini-tablet coating, especially for modified-release films, because particles pass repeatedly through the spray zone in an organised flow, giving dense, uniform films with low agglomeration. Top spray is best for granulation and simple taste-masking or protective coats. Tangential (rotor) spray uses a rotating disc and is used for powder layering, pelletisation and some coatings. Many processors accept interchangeable inserts for all three.

Three configurations compared

FactorTop sprayBottom spray (Wurster)Tangential (rotor)
Nozzle positionAbove the bed, spraying down against airflowBelow a partition column, spraying up with airflowSide of chamber, into a bed moved by a rotating disc
Particle flowRandom fluidisationOrganised circulation through spray zoneRolling spiral motion
Film qualityLess uniform; more spray dryingMost uniform and dense filmsGood; denser product
Agglomeration riskHigherLowModerate
Main usesGranulation, drying, simple coatsModified-release and enteric coating, drug layering on pelletsPowder layering, pelletisation, some coatings

Evidence on Wurster performance

  • Patent literature reports agglomeration of roughly 5 to 15% with top spray compared with rarely above 2% in Wurster mode, with coating times that can be half as long.
  • Comparative release studies found the Wurster process gave the densest coatings and slowest release, while top spray gave irregular release.
  • The classical Wurster chamber has been used since the 1960s and remains the reference for small-particle coating uniformity.

What to specify in a fluid bed processor

  1. Interchangeable inserts: top spray bowl, Wurster insert and rotor, if you need all three.
  2. Wurster partition height adjustment and air distribution plate options.
  3. Nozzle design and number for scale-up; multi-nozzle Wurster inserts at larger scale.
  4. Product temperature, airflow and humidity control, with dew point conditioning.
  5. Filter design and filter shaking or blow-back; wash-in-place.
  6. Explosion protection or pressure shock resistance for solvent processes.

Scale-up notes

Wurster scale-up usually adds partitions and nozzles rather than making one large column, so the spray zone stays similar. Keep droplet size, bed temperature and the ratio of spray rate to drying capacity consistent. After coating, pellets are often filled into capsules; see pellet and powder capsule filling.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 52 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Coating (25)

ACG Worldwide Solid Dosage Consumables and Machinery; Anish Pharma Equip Pvt. Ltd; Bectochem Consultant & Engineers Pvt. Ltd.; Bowman & Archer Pharma Machines (India) Pvt.Ltd; Gansons Limited; Indo German Pharma Engineers; Koroth Systems Pvt. Ltd.; Prism Pharma Machinery; S.K. Pharma Machinery Pvt Ltd; Solace Engineers (Mktg) Pvt. Ltd.; SSPM Systems & Engineers; Sunsai Pharma Equipments Pvt. Ltd.; Tapasya Engineering Works Pvt Ltd; The United Engineering Company; Bombay Pharma Equipments Pvt Ltd; Bright Pharma Engineering Private Limited; Brinda Pharma Technologies Pvt Ltd.; Glatt Group; Grovers International; HLE Engineers Pvt. Ltd.; Mack Pharmatech Pvt. Ltd.; Promp+tech Pharma Equipments (India) Pvt Ltd; R.P. Products Pharma Equipments Pvt Ltd; Ramashary Pharma Machinery Pvt. Ltd.; Spraytech Systems India Pvt. Ltd..

Open the full entries: Oral solid dosage equipment list filtered to coating · Sterile, injectable and liquid equipment list filtered to coating

Granulation (48)

ACG Worldwide Solid Dosage Consumables and Machinery; Anish Pharma Equip Pvt. Ltd; Bectochem Consultant & Engineers Pvt. Ltd.; Bowman & Archer Pharma Machines (India) Pvt.Ltd; Cadmach Machinery Co. Pvt Ltd; Fabtech Technologies International Ltd.; Gansons Limited; Indo German Pharma Engineers; Parle Global Technologies Pvt. Ltd.; Prism Pharma Machinery; Saan Engineers Pvt Ltd; Solace Engineers (Mktg) Pvt. Ltd.; SSPM Systems & Engineers; Sunsai Pharma Equipments Pvt. Ltd.; Tapasya Engineering Works Pvt Ltd; Allegro Pharmachem Equipments; Ambica Engineering Works; Astro Mech; BEW Engineering Pvt. Ltd.; Bombay Pharma Equipments Pvt Ltd; Bright Pharma Engineering Private Limited; Brilliant Process Machinery Pvt. Ltd.; Brinda Pharma Technologies Pvt Ltd.; CEMACH; Dumra Machines; Gem Pharma Machineries; Glatt Group; Grovers International; Helios Concrew Machines; HLE Engineers Pvt. Ltd.; Imperial Pharmachines Pvt Ltd; Indo Rama Engineers; Laxmi Pharma Machines; LEISTUNG ENGINEERING PVT LTD; Mack Pharmatech Pvt. Ltd.; Mecwell Pharma Machinery Pvt. Ltd.; Omega Pharma Machinery; Pankaj Industries; Pharma Mech Machineries; Promp+tech Pharma Equipments (India) Pvt Ltd and 8 more.

Open the full entries: Oral solid dosage equipment list filtered to granulation · Engineering and validation services list filtered to granulation · Sterile, injectable and liquid equipment list filtered to granulation

Frequently asked questions

Which fluid bed method is best for pellet coating?

Bottom spray (Wurster) is the most widely used for pellets and mini-tablets because it gives uniform films and low agglomeration.

When is top spray used?

Mainly for granulation and drying, and sometimes for simple protective or taste-masking coats where film uniformity is less critical.

What is a tangential spray or rotor processor?

A fluid bed with a rotating disc at the base that creates a rolling bed. It is used for powder layering, making pellets and some coatings.

Can one fluid bed do all three?

Many processors accept interchangeable inserts for top spray, Wurster and rotor, which suits development and multi-product plants.

Related guides

Sources

  1. Polyvinyl ether encapsulated particles (Wurster vs top spray), US patent 5589267
  2. Fluid bed coating: changing properties of solids, Process Worldwide
  3. Wurster and swirl distributors for mini-tablet coating, PMC
  4. Wurster coater review, Future Journal of Pharmaceutical Sciences (Springer)
  5. What really matters with fluidized bed technology, Process Worldwide

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.