Buyer's guide · Oral solid dosage

Automatic Tablet Coater Buyer's Guide: Perforated Pan Coaters Compared

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Choose a perforated pan coater by the batch size range it can coat well, usually stated as a percentage of the pan's working or brim volume (from about 10 to 25% at the low end up to 95 to 100% at the top, depending on the design). Then compare pan design and baffles, the spray system (number of guns, anti-bearding nozzles, gun-to-bed distance), process air capacity and dew point control, automation and recipes, wash-in-place and through-wall installation.

Batch size range comes first

Batch size drives every other coating parameter: pan speed, spray setup, spray rate, bed temperature and airflow. Suppliers state a batch size range as a percentage of the pan's volume:

  • Some production pans are designed for about 25 to 95% of working volume.
  • Several newer designs claim 10 to 100% in one drum, using movable spray arms and automatic air path adjustment.
  • Interchangeable pans on one base unit are another way to cover pilot to commercial batches.

Size the pan so your normal batch sits in the middle of its range, not at the edges.

What to compare

FeatureWhy it matters
Pan perforation and bafflesFully perforated pans give better airflow through the bed; baffles decide mixing and tablet wear
Spray guns and nozzlesNumber of guns sets spray rate; anti-bearding nozzles reduce clogging and stops
Gun position adjustmentKeeps spray distance and angle right across batch sizes
Process air handlingAirflow, inlet temperature and dew point control decide drying rate and reproducibility
Coating typesAqueous film, organic solvent (needs explosion protection) and sugar coating
AutomationRecipes, automatic sampling, data recording and audit trails
CleaningWash-in-place, drainable pan, through-wall design separating technical area

Typical size ranges

Published ranges show how wide the market is: laboratory pans from about 1.5 to 20 litres, pilot and production pans from tens of litres to around 900 to 1,000 litres. One range of perforated coaters lists capacities from 40 to 600 kg per batch with pan diameters from 850 to 1,580 mm.

Buying checklist

  1. List all products and batch sizes; check each fits the coater's range.
  2. Run coating trials with your tablets and coating system.
  3. Confirm air handling unit capacity and dehumidification for your climate.
  4. Check the solution preparation vessel and pumping system are included.
  5. Ask for cleaning time data and wash-in-place coverage.
  6. Check qualification documents and control system validation support.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 25 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Coating (25)

ACG Worldwide Solid Dosage Consumables and Machinery; Anish Pharma Equip Pvt. Ltd; Bectochem Consultant & Engineers Pvt. Ltd.; Bowman & Archer Pharma Machines (India) Pvt.Ltd; Gansons Limited; Indo German Pharma Engineers; Koroth Systems Pvt. Ltd.; Prism Pharma Machinery; S.K. Pharma Machinery Pvt Ltd; Solace Engineers (Mktg) Pvt. Ltd.; SSPM Systems & Engineers; Sunsai Pharma Equipments Pvt. Ltd.; Tapasya Engineering Works Pvt Ltd; The United Engineering Company; Bombay Pharma Equipments Pvt Ltd; Bright Pharma Engineering Private Limited; Brinda Pharma Technologies Pvt Ltd.; Glatt Group; Grovers International; HLE Engineers Pvt. Ltd.; Mack Pharmatech Pvt. Ltd.; Promp+tech Pharma Equipments (India) Pvt Ltd; R.P. Products Pharma Equipments Pvt Ltd; Ramashary Pharma Machinery Pvt. Ltd.; Spraytech Systems India Pvt. Ltd..

Open the full entries: Oral solid dosage equipment list filtered to coating · Sterile, injectable and liquid equipment list filtered to coating

Frequently asked questions

What batch range can one coater handle?

It depends on the design. Many production coaters handle about 25 to 95% of working volume; some newer designs claim 10 to 100% in a single drum.

Are perforated pans better than conventional pans?

For film coating, yes in most cases: air passes through the tablet bed, which speeds drying and improves uniformity. Conventional pans are still used for some sugar coating.

How many spray guns are needed?

It depends on pan size and spray rate. Production coaters commonly use several guns; one published range lists 4 to 12 guns on large pans.

Can one coater do aqueous and solvent coating?

Yes, if it is built for solvent use with explosion protection and solvent handling. Confirm this at the specification stage.

Related guides

Sources

  1. Tablet coating: basic batch coater operating parameters and setup, Tablets & Capsules
  2. RTC OPT tablet coater, Romaco Tecpharm
  3. Fully perforated HI-COATER, Freund (Making.com)
  4. Laboratory development coating system, Making.com
  5. VGB-E perforated film coating system, Saintyco

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.