Buyer's guide · Oral solid dosage

Automatic Capsule Filling Machines for Mid-Size Pharma

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Mid-size plants usually need a fully automatic filler of about 25,000 to 100,000 capsules per hour. Machines in this band use either dosing discs (tamping pins) or dosators, and examples include Syntegon's GKF 702 (up to 42,000/h) and GKF Capsylon 1505 (about 92,000/h), IMA's ADAPTA 100 (up to 100,000/h) and Zanasi range, and Harro Höfliger's KFM series. Select on your fill types, weight control, changeover time and service, not output alone.

Dosing disc vs dosator

FactorDosing disc (tamping)Dosator
PrinciplePowder tamped into bores of a disc in several steps, then pushed into the capsule bodyA tube dips into a powder bed, forms a slug and ejects it into the body
SuitsFree-flowing and moderately cohesive powders, pelletsWide range of powders including cohesive; pellets, tablets and liquids with extra stations
Fill weight adjustmentDisc thickness and tamping depthDosator piston height and powder bed depth
Typical suppliersSyntegon (GKF)IMA (Zanasi, ADAPTA, Matic)

Both technologies are proven; trials with your own powder decide which fills it more accurately.

Example models in the mid-size band

ModelSupplierPublished outputNotes
GKF 702Syntegonup to 42,000/hPowders, granules and liquids; R&D and small batch
GKF Capsylon 1505Syntegonabout 92,000/hMedium batches and frequent product changes
ADAPTA 100IMAup to 100,000/hUp to 3 products per capsule (5 on request)
Zanasi Plus rangeIMA8,000 to 85,000/hDosator; powder, pellets, tablets, liquids
KFM III-CHarro Höfligerabout 25,000/hDosator or dosing disc
Outputs as published by suppliers or in industry guides; some listings are older, so confirm current models.

Several Indian manufacturers also build automatic fillers in this range at lower capital cost; see our Indian manufacturer directory.

Selection criteria

  1. Fill types: powders only, or pellets, mini-tablets and liquids too (see multi-dosing).
  2. Weight control: statistical checks, or 100% in-line weighing with single-capsule rejection.
  3. Capsule sizes and shells: change parts for sizes 00 to 4 and HPMC capsules.
  4. Changeover time: tool-free parts and size change time for your product mix.
  5. Yield: powder loss, especially for expensive APIs.
  6. Containment and cleaning: for potent products.
  7. Service and spares close to your plant.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 10 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Capsule filling (6)

ACG Worldwide Solid Dosage Consumables and Machinery; Karnavati Engineering; Koroth Systems Pvt. Ltd.; Solace Engineers (Mktg) Pvt. Ltd.; Prasad Meditech; S.G. Pharmatec.

Open the full entries: Oral solid dosage equipment list filtered to capsule filling

Empty capsules (5)

ACG Worldwide Solid Dosage Consumables and Machinery; Jagson Engineers; Capsugel Healthcare Pvt Ltd (Lonza Capsules & Health Ingredients); Healthcaps India Limited; Natural Capsules Limited.

Open the full entries: Packaging materials list filtered to empty capsules · Packaging machinery list filtered to empty capsules · Oral solid dosage equipment list filtered to empty capsules

Frequently asked questions

What output does a mid-size pharma company need?

Many mid-size plants run fillers of about 25,000 to 100,000 capsules per hour, often two machines rather than one large one for flexibility.

Is a dosator or dosing disc more accurate?

Both can be very accurate. Dosators handle a wider range of powders; dosing discs work well with free-flowing powders and pellets. Trials decide.

Do I need 100% weight checking?

Not always. Statistical in-process checks are common; 100% checking suits high-value, low-dose or narrow-tolerance products.

Can the same machine fill HPMC capsules?

Usually yes, with suitable settings and sometimes change parts. Confirm performance with your HPMC shells in trials.

Related guides

Sources

  1. Automatic filling machines (dosing principle and output by model), Capsugel
  2. Fully automated capsule filling system GKF Capsylon 1505, Clinical Leader
  3. Capsule filling for pharmaceuticals and nutraceuticals (GKF 702), Making.com
  4. ADAPTA 100-200 capsule filling, IMA

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.