Buyer's guide · Sterile and injectables

Automatic Visual Inspection Machines for Vials and Ampoules

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Injectables must be essentially free of visible particles, so every unit is inspected. Automatic visual inspection machines spin containers and use cameras, lighting and sometimes static-division sensors to detect particles, cracks, fill level, stopper and crimp defects, and cosmetic flaws. They are qualified by showing detection at least as good as trained human inspectors, typically with a Knapp test using defect test sets, as described in USP chapter 1790. Choose by container types, defect classes, speed, false reject rate and validation support.

Requirements behind inspection

  • USP chapter 790 requires injections to be essentially free from visible particulates and defines manual inspection conditions harmonised with the European Pharmacopoeia: 2,000 to 3,750 lux, black and white backgrounds, no magnification, about 5 seconds per background.
  • USP 790 also sets the acceptance sampling after 100% inspection (AQL 0.26% for particles).
  • USP chapter 1790 gives guidance on inspection methods and on qualifying manual, semi-automatic and automatic inspection.
  • Inspection is probabilistic: detection depends on particle size, container and product, so prevention matters as much as detection.

What AVI machines detect

Defect classExamplesTypical technology
Particles in liquidGlass, fibres, rubber, metalSpin and stop, cameras tracking moving objects; static division sensors
Container defectsCracks, chips, scratches, inclusionsMultiple cameras with different lighting angles
Fill levelUnder or overfillCamera or high-frequency sensors
ClosureMissing or misplaced stopper, crimp defectsTop and side cameras
Lyophilized cakeCollapse, cracks, foreign matterDedicated cake inspection cameras
Container closure integrityLeaks, cracksSeparate leak detection (high voltage, vacuum decay, laser headspace)

Deep learning software is increasingly used to cut false rejects on difficult products.

Qualification: Knapp test and beyond

The Knapp method compares the machine's probability of detecting each defect with that of trained manual inspectors using a test set of known defective and good units, run repeatedly. Acceptance requires the automatic system to detect defects at least as well as manual inspection. Qualification also covers false reject rates, test set maintenance, FAT, SAT and ongoing performance checks with challenge sets.

Buying checklist

  1. Container formats: vials, ampoules, syringes, cartridges; liquid, suspension or lyophilized.
  2. Defect library and detection rates with your product, at your line speed.
  3. False reject rate and re-inspection strategy.
  4. Integration with leak testing and the filling line; see ampoule filling.
  5. Recipe management, audit trails and Part 11 compliant data.
  6. Supplier support for test set creation and Knapp studies.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 14 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Vision inspection (14)

Ace Technologies & Packaging Systems Pvt Ltd; ACG Worldwide Solid Dosage Consumables and Machinery; Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; CVC Technologies; Jagson Engineers; Jekson; Parle Global Technologies Pvt. Ltd.; Salesworth Synergies LLP; Cognex Sensors India Pvt. Ltd.; ImageProVision Technology; Inos Technologies Pvt. Ltd.; Utopia Optovision Pvt. Ltd.

Open the full entries: Automation, inspection and serialization list filtered to vision inspection · Packaging machinery list filtered to vision inspection · Sterile, injectable and liquid equipment list filtered to vision inspection · Oral solid dosage equipment list filtered to vision inspection

Frequently asked questions

Is automatic inspection required?

100% inspection is required; it can be manual, semi-automatic or automatic. Automatic systems are common at higher volumes and give more consistent results.

What is a Knapp test?

A statistical method that compares the detection probability of an inspection process with that of trained manual inspectors, using a test set of defective and good units.

What is the AQL for visible particles under USP 790?

USP 790 uses an acceptance sampling plan with an AQL of 0.26% after 100% inspection.

Can AVI inspect suspensions and lyophilized products?

With difficulty. These are difficult-to-inspect products; supplemental methods and specialised cameras or destructive tests are often needed.

Related guides

Sources

  1. Visual inspection: seeing room for improvement, Pharmaceutical Technology
  2. Visual inspection requirements and FDA 483 themes, FDA presentation (Shabushnig)
  3. Evaluation of visual inspection of parenteral products, ISPE
  4. USP chapter 1790 visual inspection of injections published, ECA Academy

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.