Buyer's guide · Sterile and injectables

Insulin Cartridge Filling Machines

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Insulin and GLP-1 cartridges are filled either in bulk, where the line washes, siliconises, sterilises and closes the bottom with a plunger before filling from the top and crimping a cap, or as nested ready-to-use cartridges. Key requirements are accurate plunger (stopper) position for pen dosing, precise fill volumes, low-particle capping and gentle handling of the glass. Outputs range from a few thousand per hour on nested modules to about 36,000 per hour on high-speed lines such as Syntegon's MLD 5000.

Bulk vs nested cartridges

FactorBulk cartridgesNested RTU cartridges
PreparationWashing, siliconisation, sterilisation on the lineSupplied ready to use
Typical outputHigh; long runsLow to medium; flexible
Typical productsInsulin, GLP-1 (such as semaglutide), dental anaestheticsClinical and smaller commercial products
Equipment scopeLarger line with washer, siliconiser, tunnel, filler, capperTub opening, filler and closer, often shared with syringes and vials

Critical quality points

  • Plunger position: pen injectors need consistent stopper placement for accurate dosing; measure it in line.
  • Fill volume and headspace: 100% in-process weighing at higher-value lines; minimise air bubbles.
  • Siliconisation: uniform silicone layer for consistent glide force; some lines add in-line glide force measurement.
  • Capping: low-particle crimp capping of the septum cap.
  • Glass handling: avoid scratches and breakage that create particles or cosmetic defects.
  • Suspension products: some insulins need mixing balls inserted and homogeneous dosing.

Example outputs

  • Syntegon MLD 5000: up to 36,000 cartridges per hour, with Annex 1 upgrades for insulin and GLP-1.
  • Bausch+Ströbel bulk cartridge lines from low to very high outputs, including siliconising, filling and optional glide force measurement.
  • Bausch+Ströbel SFM 5105 nested module: up to 4,300 units per hour for 0.5 to 10 ml.

GLP-1 demand has made cartridge capacity a bottleneck in recent years, so delivery lead times for lines can be long.

Selection checklist

  1. Annual volume, cartridge sizes (often 1.5 to 3 ml) and number of products.
  2. Bulk or nested, and the matching component supply chain.
  3. Stopper placement accuracy and in-line measurement.
  4. Barrier technology and decontamination.
  5. Downstream: inspection, pen assembly and labelling; see syringe filling for shared platforms.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 31 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Vial and ampoule lines (11)

Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; Food & Pharma Specialities; GMP Equipment Pvt Ltd; NKP Pharma Pvt. Ltd.; Snowbell Machines Pvt Ltd; The United Engineering Company; Tofflon (India) Pvt. Ltd; Ambica Pharma Machines Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to vial and ampoule lines · Packaging machinery list filtered to vial and ampoule lines · Oral solid dosage equipment list filtered to vial and ampoule lines

Primary packaging (20)

Amcor Flexibles India Private Ltd; Universal Medicap Ltd; Aaywon Lamitubes And packaging solutions; AGC Asia Pacific India Pvt. Ltd.; Aptar Pharma India Pvt. Ltd.; Cap & Seal (Indore) Pvt Ltd; Ecobliss India Pvt. Ltd.; Essel Propack; Huzhou zhongrui Cleaning Technology Co, Ltd; Ningbo Zhengli Pharmaceutical Packaging Co, Ltd; Om Sai Pharma Pack; Sachin Industries Ltd.; Schott Kaisha Private Limited; Shree Naina Packwell; Starco Metaplast Pvt. Ltd.; Top Syringe Mfg. Co. Pvt. Ltd.; Uflex Limited; Vijay Flexible Containers Pvt. Ltd.; Weihai Lianqiao New Material Science & Technology Co, Ltd; West Pharmaceuticals Packaging India Pvt Ltd..

Open the full entries: Packaging materials list filtered to primary packaging

Frequently asked questions

How are insulin cartridges filled?

Usually in bulk: cartridges are washed, siliconised, sterilised, closed at the bottom with a plunger, filled from the top and sealed with a crimped septum cap.

Why is plunger position important?

Pen injectors deliver doses by moving the plunger, so its starting position affects dose accuracy and pen function.

How fast are cartridge filling lines?

Up to about 36,000 cartridges per hour on high-speed lines; nested modules run a few thousand per hour.

Can one line fill cartridges and syringes?

Nested platforms often handle syringes, vials and cartridges with format changes. Bulk cartridge lines are usually dedicated.

Related guides

Sources

  1. Cartridge filling machines, Syntegon
  2. Processing of cartridges in bulk, Bausch+Ströbel
  3. Filling and closing system for nested containers (SFM 5105), Making.com
  4. Pharmaceutical cartridge filling systems, Pharmaceutical Online

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.