Guide · Plant setup

Dry Powder Injection Filling Line: Equipment and Contamination Control

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

A dry powder injection line washes and depyrogenates vials, fills sterile powder aseptically, stoppers and caps them, then inspects and packs. The two main dosing technologies are auger fillers, which meter powder with a rotating screw, and vacuum-pressure powder wheels, which draw powder into fixed-volume chambers and blow it into the vial. Filling takes place in Grade A, usually inside RABS or an isolator, with dust extraction and in-line weight checks. Beta-lactam antibiotics, the largest use, need fully separate facilities.

Line layout

  1. Vial washing with purified water and WFI.
  2. Depyrogenation in a dry heat tunnel.
  3. Sterile powder transfer to the filler hopper, through a contained, aseptic connection.
  4. Powder dosing and stoppering in Grade A.
  5. Weight checking: statistical in-process sampling or 100% weighing.
  6. Capping with extraction, then external vial washing to remove powder residue.
  7. Visual inspection, labelling and packing.

Auger vs vacuum-pressure powder wheel

FactorAugerVacuum-pressure powder wheel
PrincipleRotating screw meters powder by turnsVacuum draws powder into fixed chambers; sterile gas pushes it into the vial
Dose adjustmentNumber of screw turnsPiston depth in each chamber
Best suited toFree-flowing and moderately cohesive powders, wide dose rangeHigh-speed, high-accuracy filling of suitable powders
Speed (published examples)Up to about 300 vials per minuteUp to about 400 vials per minute
Watch pointsPowder compression in the screw; dustChamber geometry, powder density consistency, gas quality

Run trials with your actual powder: flow, bulk density and particle size decide which technology works.

Contamination control and containment

  • Fill in Grade A, inside RABS or an isolator, with the background grade set by EU GMP Annex 1 for the barrier type.
  • Extract powder at the dosing station without disturbing unidirectional airflow.
  • Use contained powder transfer, such as split butterfly valves or alpha-beta ports.
  • Protect operators from sensitising or potent powders, especially antibiotics.
  • Run aseptic process simulations with a sterile placebo powder suitable for the line.

Beta-lactams need separate facilities

Many sterile powders are beta-lactam antibiotics. In the US, penicillin requires separate facilities and air handling under 21 CFR Part 211, and FDA guidance expects the same separation for other beta-lactams such as cephalosporins and carbapenems. EU GMP also requires dedicated facilities for these products. Plan a fully separate building or block, not just a separate room.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 29 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Vial and ampoule lines (11)

Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; Food & Pharma Specialities; GMP Equipment Pvt Ltd; NKP Pharma Pvt. Ltd.; Snowbell Machines Pvt Ltd; The United Engineering Company; Tofflon (India) Pvt. Ltd; Ambica Pharma Machines Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to vial and ampoule lines · Packaging machinery list filtered to vial and ampoule lines · Oral solid dosage equipment list filtered to vial and ampoule lines

Isolators and RABS (4)

Fabtech Technologies International Ltd.; Getinge India Pvt Ltd; Snowbell Machines Pvt Ltd; Tofflon (India) Pvt. Ltd.

Open the full entries: Sterile, injectable and liquid equipment list filtered to isolators and rabs · Engineering and validation services list filtered to isolators and rabs

Sterilizers and autoclaves (10)

Ace Technologies & Packaging Systems Pvt Ltd; Gansons Limited; Getinge India Pvt Ltd; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Snowbell Machines Pvt Ltd; Swiss Engineering Pvt Ltd; Ozone Overseas Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to sterilizers and autoclaves · Packaging machinery list filtered to sterilizers and autoclaves · Process plant equipment list filtered to sterilizers and autoclaves · Oral solid dosage equipment list filtered to sterilizers and autoclaves

Purified water and WFI (14)

Christ Nishotech Water Systems Pvt Ltd; D.D. Enterprises; Fabtech Technologies International Ltd.; GMP Technical Solutions Pvt Ltd; Hydropure Systems Pvt. Ltd.; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Praj HiPurity Systems Limited.; Swiss Engineering Pvt Ltd; Aquamech Engineering Corporation; Indu IonPure India Pvt. Ltd.; Sanpure Systems Pvt Ltd; Wab India Pvt. Ltd..

Open the full entries: Water and utilities list filtered to purified water and wfi · Sterile, injectable and liquid equipment list filtered to purified water and wfi · Engineering and validation services list filtered to purified water and wfi · Process plant equipment list filtered to purified water and wfi

Frequently asked questions

Which is more accurate: auger or powder wheel?

Both can be accurate. Vacuum-pressure systems are known for high accuracy at high speed with suitable powders; augers handle a wider range of powders. Trials with your product decide.

Can a sterile powder line be shared between products?

Only within limits set by risk assessment and validated cleaning, and never between beta-lactams and other products.

Is 100% weighing necessary?

Not always. Many lines use statistical in-process weight checks, but 100% weight checking is common for high-value or narrow-tolerance products.

What cleanroom grade is needed for powder filling?

Grade A at the point of fill, with background per Annex 1: at least Grade B for RABS, and Grade C or D for isolators depending on type.

Related guides

Sources

  1. Handling injectable powders with vacuum-pressure dosing, Pharmaceutical Processing World
  2. Aseptic powder vial processing line, IMA
  3. Dry powder filling machines, Syntegon
  4. Introduction to volumetric powder filling technology, Labmate
  5. Annex 1 barrier grade thresholds, IntuitionLabs

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.