Vials are washed with purified water and WFI in a rotary or linear washer, then pass through a dry heat tunnel that depyrogenates and sterilises them before they enter Grade A for filling. Validation commonly demonstrates at least a 3-log reduction of an endotoxin challenge, the criterion in FDA's 2004 aseptic guidance and USP chapter 1211; a widely used condition is 250 °C for 30 minutes or an equivalent. Tunnels usually run hotter for shorter times. Washers and tunnels are generally bought with the filler as one line.
How the line works
- Washing: vials are inverted and sprayed inside and out with recirculated water, purified water, WFI and filtered compressed air in sequence. Ultrasonic baths are often added.
- Depyrogenation tunnel: three zones: an infeed zone, a hot zone with HEPA-filtered unidirectional hot air (often 250 to 350 °C), and a cooling zone that brings vials back near room temperature under Grade A air.
- Transfer to filling: vials leave the cooling zone directly into the filler's Grade A area.
Validation essentials
- Endotoxin challenge vials spiked with at least 1,000 endotoxin units; acceptance commonly at least 3-log reduction.
- Heat distribution and penetration studies across lanes, since edge lanes can run cooler.
- Lethality expressed as FH; USP describes an equivalent of 250 °C for 30 minutes.
- Particle counts and airflow in the cooling zone; HEPA integrity of hot zone filters.
- Note that EU GMP Annex 1 requires depyrogenation to be validated but does not itself state a log-reduction figure.
Design features to compare
| Feature | Why it matters |
|---|---|
| Washer type (rotary or linear) and nozzle design | Cleaning effectiveness, glass handling, format range |
| Water consumption and recovery | WFI is costly; recovery cuts operating cost |
| Hot zone temperature uniformity | Validated lethality across all lanes |
| High-temperature HEPA filters | Particle control; filter life and testing access |
| Cooling zone design | Vials must be cool and particle-free on exit |
| Pressure balance with filling room | Prevents air from lower grade areas flowing into Grade A |
| Format change time | Multi-product plants |
Suppliers
Washers and tunnels are usually supplied by the filling line maker: groninger, Syntegon, Bausch+Ströbel, IMA and Optima in Europe, plus Truking and Tofflon in China and several Indian manufacturers such as ACG and Ambica. Batch dry heat ovens remain an option for small volumes. See our turnkey fill-finish guide.
Companies listed in the Hello Pharma supplier directory
The Hello Pharma supplier directory lists 19 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.
Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.
Vial and ampoule lines (11)
Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; Food & Pharma Specialities; GMP Equipment Pvt Ltd; NKP Pharma Pvt. Ltd.; Snowbell Machines Pvt Ltd; The United Engineering Company; Tofflon (India) Pvt. Ltd; Ambica Pharma Machines Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..
Open the full entries: Sterile, injectable and liquid equipment list filtered to vial and ampoule lines · Packaging machinery list filtered to vial and ampoule lines · Oral solid dosage equipment list filtered to vial and ampoule lines
Sterilizers and autoclaves (10)
Ace Technologies & Packaging Systems Pvt Ltd; Gansons Limited; Getinge India Pvt Ltd; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Snowbell Machines Pvt Ltd; Swiss Engineering Pvt Ltd; Ozone Overseas Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..
Open the full entries: Sterile, injectable and liquid equipment list filtered to sterilizers and autoclaves · Packaging machinery list filtered to sterilizers and autoclaves · Process plant equipment list filtered to sterilizers and autoclaves · Oral solid dosage equipment list filtered to sterilizers and autoclaves
Frequently asked questions
What temperature is used for depyrogenation?
A common reference is 250 °C for 30 minutes or an equivalent. Tunnels typically run hotter, around 250 to 350 °C, with shorter exposure, validated by endotoxin challenge.
What does a 3-log endotoxin reduction mean?
A 99.9% reduction in endotoxin activity, shown using challenge vials spiked with at least 1,000 endotoxin units.
Does depyrogenation also sterilise?
Yes. A process that destroys endotoxin is more severe than one that kills microorganisms, so validated depyrogenation also demonstrates sterilisation.
Can ready-to-use vials skip the washer and tunnel?
Yes. Nested RTU vials arrive sterile and depyrogenated, so lines using them need tub opening rather than washing and tunnel equipment.
Related guides
Sources
- Qualification and validation of depyrogenation tunnels and autoclaves, Pharmaceutical Online
- Endotoxin control in depyrogenation tunnels, Cleanroom Technology
- A comparative study of methods for endotoxin destruction, American Pharmaceutical Review
- USP depyrogenation chapters summary, Associates of Cape Cod
- Depyrogenation vs sterilization: what the standards say, Laafon
This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.
