Buyer's guide · Sterile and injectables

Pharmaceutical Autoclave Selection: Steam, Air-Steam and Porous Loads

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Match the cycle to the load. Porous and hollow loads such as filters, stoppers, tubing, garments and machine parts need pre-vacuum cycles that remove air before steam enters, with a daily Bowie-Dick test. Sealed liquid-filled containers that could deform or burst, such as prefilled syringes, plastic bags and BFS units, need air-steam mixture or superheated water cycles with counter-pressure. Gravity cycles are limited to simple, unwrapped loads. A production autoclave for a sterile plant usually needs pre-vacuum plus a liquid or air-steam mixture capability.

Cycle types matched to loads

CycleHow it removes airSuitable loadsNot suitable for
Pre-vacuum (porous load)Vacuum pulses alternating with steamWrapped parts, filters, stoppers, tubing, garments, hollow itemsSealed liquid containers
Gravity displacementSteam pushes air out by gravitySimple unwrapped solid items, open liquidsPorous or hollow loads
Air-steam mixtureFan-circulated steam and air under overpressurePrefilled syringes, plastic bags, BFS units, sealed bottlesPorous loads
Superheated water sprayWater heated and sprayed over containers under overpressureLarge volume parenterals, flexible bags, terminally sterilised productsPorous loads
Liquid cycle (slow exhaust)Controlled cooling to avoid boil-overOpen or vented liquids in the lab or media preparationSealed flexible containers

Tests and validation

  • Bowie-Dick test daily for pre-vacuum porous load sterilisers, and a vacuum leak test, as part of routine checks.
  • Heat distribution (empty chamber) and heat penetration (loaded) studies.
  • Biological indicators to confirm lethality.
  • Defined loading patterns, validated for each load type.
  • F0 is used for liquid and air-steam mixture processes; for porous loads, effective steam penetration must be shown first.

Selection checklist

  1. List all loads: parts, garments, filters, stoppers, filled containers, waste.
  2. Decide which cycles you need and whether one or two autoclaves serve them best.
  3. Chamber size from the largest load and number of loads per day.
  4. Double-door pass-through design between preparation area and clean area, with interlocks and bioseal.
  5. Pure steam supply quality for direct-contact sterilisation; see WFI and pure steam.
  6. Controls with audit trails and cycle records; compliance with EN 285 or local equivalents.
  7. Waste decontamination autoclave if biological agents are handled.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 10 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Sterilizers and autoclaves (10)

Ace Technologies & Packaging Systems Pvt Ltd; Gansons Limited; Getinge India Pvt Ltd; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Snowbell Machines Pvt Ltd; Swiss Engineering Pvt Ltd; Ozone Overseas Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to sterilizers and autoclaves · Packaging machinery list filtered to sterilizers and autoclaves · Process plant equipment list filtered to sterilizers and autoclaves · Oral solid dosage equipment list filtered to sterilizers and autoclaves

Frequently asked questions

Which autoclave cycle is used for stoppers and filters?

A pre-vacuum (porous load) cycle, which removes air so steam can penetrate wrapped and hollow items.

How are prefilled syringes sterilised in an autoclave?

With an air-steam mixture or superheated water cycle that applies counter-pressure, so plungers do not move and containers do not deform.

What is a Bowie-Dick test?

A daily test for pre-vacuum sterilisers that checks air removal and steam penetration using a standard test pack.

Do I need two autoclaves?

Often. Many sterile plants have one for porous loads and one for liquid or terminal sterilisation, or a single unit with both cycle types if volumes allow.

Related guides

Sources

  1. Sterilization cycles in a GMP pharmaceutical environment, Tuttnauer
  2. Moist heat sterilization process decision tree, GMP Insiders
  3. What is an autoclave and how does it work?, RSSL
  4. EU GMP Annex 1 overview, NSF

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.