Directory · Sterile and injectables

WFI and Pure Steam Generation System Suppliers

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Water for Injection (WFI) can be produced by multi-effect distillation, vapour compression distillation or, since the European Pharmacopoeia's 2017 revision aligned it with the US and Japan, by validated membrane processes such as reverse osmosis combined with other techniques like electrodeionisation and ultrafiltration. Distillation is proven and suits hot storage; vapour compression uses less energy than multi-effect; membrane WFI is cheapest to run but needs careful microbial control. Pure steam generators supply autoclaves and SIP. Leading suppliers include Stilmas, BWT, Veolia, Evoqua (Xylem), MECO and others.

WFI quality limits

AttributeTypical pharmacopoeial limit
Conductivitybelow 1.3 µS/cm at 25 °C
Total organic carbonbelow 500 ppb (0.5 mg/l)
Bacteriabelow 10 CFU/100 ml
Endotoxinbelow 0.25 EU/ml

Generation technologies compared

TechnologyHow it worksStrengthsWatch points
Multi-effect distillation (MED)Several columns; steam from each heats the nextProven; robust microbial and endotoxin removal; hot WFIHigh steam use and cooling water
Vapour compression distillation (VC)Compressor recycles vapour latent heatLower energy than MED; tolerant feed waterRotating compressor maintenance
Membrane WFIRO plus EDI plus ultrafiltration, ambient temperatureMuch lower energy and capital; no steamBiofilm risk; sanitisation and monitoring design critical

A supplier's published comparison puts energy cost per 1,000 gallons at about $43 to $58 for multi-effect, $25 to $28 for vapour compression and under $5 for membrane WFI. Vendors of membrane systems claim up to 70% lower capital and 90% lower operating cost; treat these as supplier claims.

Pure steam generators

  • Produce steam from purified water that, when condensed, meets WFI quality; used for SIP, autoclaves and humidification of clean areas.
  • Check steam quality tests: non-condensable gases, dryness and superheat, as well as condensate quality.
  • Size for peak demand, such as simultaneous autoclave and SIP cycles.

Supplier landscape and selection

Major water system suppliers include Stilmas, BWT, Veolia, Evoqua (Xylem), MECO, Steris Finn-Aqua and Indian and Chinese manufacturers; many supply generation, storage and distribution loops together.

  1. Demand profile: peak and daily WFI use, hot or ambient loop.
  2. Utilities available: plant steam, power, cooling water.
  3. Target markets and regulator expectations for membrane WFI.
  4. Sanitisation strategy: hot water, ozone, steam.
  5. Monitoring: online TOC, conductivity and rapid microbiology.

See also vessels and CIP/SIP.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 14 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Purified water and WFI (14)

Christ Nishotech Water Systems Pvt Ltd; D.D. Enterprises; Fabtech Technologies International Ltd.; GMP Technical Solutions Pvt Ltd; Hydropure Systems Pvt. Ltd.; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Praj HiPurity Systems Limited.; Swiss Engineering Pvt Ltd; Aquamech Engineering Corporation; Indu IonPure India Pvt. Ltd.; Sanpure Systems Pvt Ltd; Wab India Pvt. Ltd..

Open the full entries: Water and utilities list filtered to purified water and wfi · Sterile, injectable and liquid equipment list filtered to purified water and wfi · Engineering and validation services list filtered to purified water and wfi · Process plant equipment list filtered to purified water and wfi

Pure steam (5)

Christ Nishotech Water Systems Pvt Ltd; Hydropure Systems Pvt. Ltd.; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Praj HiPurity Systems Limited..

Open the full entries: Water and utilities list filtered to pure steam · Sterile, injectable and liquid equipment list filtered to pure steam

Frequently asked questions

Can WFI be made without distillation?

Yes. Since 2017 the European Pharmacopoeia allows purification processes equivalent to distillation, such as reverse osmosis combined with other techniques; the US and Japan already allowed this.

Which WFI technology uses least energy?

Membrane-based WFI uses far less energy than distillation; vapour compression uses less than multi-effect distillation.

What is pure steam used for?

Sterilisation-in-place, autoclaves and other direct-contact uses, where condensed steam must meet WFI quality.

Is distillation still preferred?

Many plants keep distillation for hot WFI and proven microbial control, while new projects increasingly consider membrane systems.

Related guides

Sources

  1. Water for injection: methods after the 2017 Ph. Eur. update, Veolia
  2. Revised WFI guidelines offer greater choice of techniques, Manufacturing Chemist
  3. Water for injection (quality limits and energy comparison), Xylem
  4. A cost review of four WFI system designs, MECO
  5. Vapor compression vs membrane-based WFI, Processing Magazine

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.