Checklist · Plant setup

Sterile Injectable Facility Equipment List: Washing to Visual Inspection

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

A sterile injectable facility needs equipment in five groups: component preparation (vial or ampoule washers, depyrogenation tunnel, stopper processing, autoclave), solution preparation (compounding vessels, sterile filtration with filter integrity testing), aseptic filling inside RABS or an isolator, freeze drying where needed, and finishing (capping, visual inspection, leak testing, labelling and packing). Clean utilities, especially Water for Injection, pure steam and clean compressed gases, and an environmental monitoring system complete the list.

Process flow and cleanroom grades

StepMain equipmentTypical environment
Component washingRotary or linear vial washer, ampoule washer, stopper washerGrade D or C
Depyrogenation and sterilisationDry heat tunnel for glass; autoclave for stoppers, parts and garmentsExit into Grade A, background per Annex 1
Solution compoundingJacketed stainless steel vessels with mixers, or single-use bags; transfer systemsGrade C or D, depending on bioburden control and closed processing
Sterile filtrationSterilising grade filters in housings, filter integrity testerFinal filter as close to the fill point as practical
Aseptic filling and stopperingVial, ampoule, syringe or cartridge filler inside RABS or isolatorGrade A, with Grade B background for RABS; Grade C or D for isolators
Freeze drying (if required)Lyophilizer with automatic loadingLoading under Grade A protection
CappingCrimp capping machine with extractionGrade A air supply for the cap application
Inspection and testingManual inspection booths, automatic visual inspection, container closure or leak testingControlled, non-classified or Grade D
Labelling and packingLabeller, cartoner, serialization, case packerPackaging hall
Typical arrangement. Final room grades must come from the site's contamination control strategy and Annex 1 or WHO requirements.

Clean utilities

  • Water for Injection (WFI): by distillation or, under the European Pharmacopoeia since 2017, validated non-distillation methods based on reverse osmosis combined with other techniques; with a hot or ambient loop and storage.
  • Purified water as feed and for early washing steps.
  • Pure steam generator for autoclaves and sterilisation-in-place.
  • Clean compressed air and nitrogen filtered at point of use.
  • HVAC with terminal HEPA filtration, pressure cascades and continuous particle monitoring in Grade A.
  • Clean-in-place and sterilisation-in-place skids for vessels and transfer lines.

Quality control and monitoring

  • Environmental monitoring: particle counters, active air samplers, settle and contact plates, with continuous monitoring in Grade A.
  • Microbiology laboratory with incubators, sterility test isolator and endotoxin testing.
  • Filter integrity testers and container closure integrity testing.
  • Data acquisition and alarms for critical parameters, with audit trails.

Decisions that change the whole list

  • Terminal sterilisation or aseptic processing: terminal sterilisation in the final container is preferred where the product allows, and reduces the aseptic equipment needed.
  • RABS or isolator: decides room grades, gowning and the HVAC design.
  • Container types: vials, ampoules, prefilled syringes, cartridges or bags each need different washing, filling and closing equipment.
  • Liquid or lyophilized: lyophilization adds freeze dryers, loading systems and a longer fill-finish schedule.
  • Stainless steel or single-use: single-use systems cut cleaning and validation for multi-product and biologics plants.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 62 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Vial and ampoule lines (11)

Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; Food & Pharma Specialities; GMP Equipment Pvt Ltd; NKP Pharma Pvt. Ltd.; Snowbell Machines Pvt Ltd; The United Engineering Company; Tofflon (India) Pvt. Ltd; Ambica Pharma Machines Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to vial and ampoule lines · Packaging machinery list filtered to vial and ampoule lines · Oral solid dosage equipment list filtered to vial and ampoule lines

Sterilizers and autoclaves (10)

Ace Technologies & Packaging Systems Pvt Ltd; Gansons Limited; Getinge India Pvt Ltd; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Snowbell Machines Pvt Ltd; Swiss Engineering Pvt Ltd; Ozone Overseas Pvt. Ltd.; Sterimax Engineering Pvt. Ltd..

Open the full entries: Sterile, injectable and liquid equipment list filtered to sterilizers and autoclaves · Packaging machinery list filtered to sterilizers and autoclaves · Process plant equipment list filtered to sterilizers and autoclaves · Oral solid dosage equipment list filtered to sterilizers and autoclaves

Isolators and RABS (4)

Fabtech Technologies International Ltd.; Getinge India Pvt Ltd; Snowbell Machines Pvt Ltd; Tofflon (India) Pvt. Ltd.

Open the full entries: Sterile, injectable and liquid equipment list filtered to isolators and rabs · Engineering and validation services list filtered to isolators and rabs

Freeze dryers (2)

Machinfabrik Industries Pvt. Ltd.; Tofflon (India) Pvt. Ltd.

Open the full entries: Sterile, injectable and liquid equipment list filtered to freeze dryers

Purified water and WFI (14)

Christ Nishotech Water Systems Pvt Ltd; D.D. Enterprises; Fabtech Technologies International Ltd.; GMP Technical Solutions Pvt Ltd; Hydropure Systems Pvt. Ltd.; Indo German Pharma Engineers; Machinfabrik Industries Pvt. Ltd.; Pharmalab India Pvt Ltd; Praj HiPurity Systems Limited.; Swiss Engineering Pvt Ltd; Aquamech Engineering Corporation; Indu IonPure India Pvt. Ltd.; Sanpure Systems Pvt Ltd; Wab India Pvt. Ltd..

Open the full entries: Water and utilities list filtered to purified water and wfi · Sterile, injectable and liquid equipment list filtered to purified water and wfi · Engineering and validation services list filtered to purified water and wfi · Process plant equipment list filtered to purified water and wfi

Vision inspection (14)

Ace Technologies & Packaging Systems Pvt Ltd; ACG Worldwide Solid Dosage Consumables and Machinery; Brio Pharma Technologies Pvt Ltd; Brothers Pharmamach (I) Pvt Ltd; Compromec; CVC Technologies; Jagson Engineers; Jekson; Parle Global Technologies Pvt. Ltd.; Salesworth Synergies LLP; Cognex Sensors India Pvt. Ltd.; ImageProVision Technology; Inos Technologies Pvt. Ltd.; Utopia Optovision Pvt. Ltd.

Open the full entries: Automation, inspection and serialization list filtered to vision inspection · Packaging machinery list filtered to vision inspection · Sterile, injectable and liquid equipment list filtered to vision inspection · Oral solid dosage equipment list filtered to vision inspection

Cleanroom panels and doors (19)

Airtech Systems India Pvt. Ltd.; Fabtech Technologies International Ltd.; Gandhi Automations Pvt. Ltd.; GMP Technical Solutions Pvt Ltd; Aastha Cleanroom Systems Private Limited; Clean Coats Pvt. Ltd.; Freudenberg Gala Household Product Pvt Ltd; Hvax Technologies Pvt. Ltd.; Integrated Cleanroom Technology Pvt. Ltd.; Khimsaria Associates; Khosla Profil Pvt. Ltd.; Lindstrom Services India Pvt Ltd; Moreschi Asia Doors P Ltd; Nicomac Clean Rooms Far East Pvt Ltd; Pharma Air Modular System; Suntec Teknopak Cleanrooms & Containments; Synergy Thrislington; Ultramax Hydrojet Pvt Ltd; Vishva Protech Pvt. Ltd..

Open the full entries: Cleanroom, HVAC and containment list filtered to cleanroom panels and doors · Engineering and validation services list filtered to cleanroom panels and doors

Laminar flow and biosafety (8)

GMP Technical Solutions Pvt Ltd; SSPM Systems & Engineers; Thermolab Scientific Equipments Pvt Ltd; Ace Hygiene Product Pvt Ltd (Alfaa UV); Contec Airflow Pvt. Ltd.; Esco Biotech Pvt. Ltd.; Labguard India Pvt Ltd; Suntec Teknopak Cleanrooms & Containments.

Open the full entries: Cleanroom, HVAC and containment list filtered to laminar flow and biosafety · Lab and analytical list filtered to laminar flow and biosafety · Oral solid dosage equipment list filtered to laminar flow and biosafety

Frequently asked questions

What is the minimum equipment for a small vial filling unit?

A vial washer, depyrogenation tunnel, autoclave, compounding vessel, sterilising filtration with integrity tester, filling and stoppering machine within a RABS or isolator, capping machine and inspection, supported by WFI, pure steam, HVAC and environmental monitoring.

Which cleanroom grade is needed for aseptic filling?

The filling zone must be Grade A. Under EU GMP Annex 1, the background is at least Grade B for RABS, Grade C for open isolators and Grade D for closed isolators, set by risk assessment.

Is WFI always made by distillation?

No. The European Pharmacopoeia has allowed validated non-distillation methods, such as reverse osmosis combined with other techniques, since 2017. Other pharmacopoeias have similar provisions; check the requirements of your target markets.

Should terminal sterilisation be used where possible?

Yes. Annex 1 treats terminal sterilisation as the preferred approach whenever the product can tolerate it, because it gives the highest sterility assurance.

Related guides

Sources

  1. What are the GMP requirements for sterile production according to Annex 1, ECA Academy
  2. WHO GMP for sterile pharmaceutical products (TRS 1044, Annex 2)
  3. Annex 1 barrier grade thresholds, IntuitionLabs
  4. EU GMP Annex 1 overview, NSF
  5. Vials dry processing line, Syntegon

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.