Guide · Plant setup

Greenfield Pharma Plant Layout and Machinery Planning Guide

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Plan a greenfield pharma plant from the process outward: fix products, batch sizes and process routes, then size equipment, then arrange rooms around a one-way flow of materials and people, with zoning and pressure cascades that protect the product and contain dust. Utilities and technical areas go above, beside or below production so machines can be maintained without entering clean rooms. Leave space for the next phase from day one.

Planning order

  1. Product and volume basis: dosage forms, products, batch sizes, annual output and target markets.
  2. Process flow: a block flow diagram for each product, with unit operations and in-process tests.
  3. Equipment sizing: machines, number of units and footprints, including service clearances.
  4. Room schedule: each room's function, area, cleanliness grade and environmental conditions.
  5. Adjacency and flows: arrange rooms so materials, people and waste move in one direction.
  6. HVAC zoning and utilities: pressure cascades, AHU zones, water, steam and compressed air routes.
  7. Expansion plan: where the next line, section or building will go.

Flows that inspectors look at

FlowDesign rule
Raw materialsReceipt, quarantine, sampling, approved store, dispensing, production: one direction without crossing finished goods
PersonnelChange rooms between grades; entry and exit routes that do not cross clean and dirty
Equipment and partsSeparate washing areas with clean and dirty sides; clean equipment storage
Finished goodsPacking to quarantine to release store to dispatch
WasteSeparate exit route; never back through clean corridors

Zoning and pressure cascades

  • Oral solids: process rooms are often held slightly negative to the corridor to contain dust, with airlocks, or positive to protect sensitive products. The WHO HVAC guideline describes both approaches and how to choose.
  • Sterile products: Grade A, B, C and D areas in a positive cascade from the cleanest area outward, as described in EU GMP Annex 1.
  • Potent or sensitising products: dedicated or segregated suites with containment and separate air handling.

Placing the equipment

  • Use through-wall installation for presses, coaters and fillers so drives and maintenance access sit in a technical area.
  • Consider vertical gravity flow (milling above blending, blending above compression) to reduce transfers and dust.
  • Keep service clearances and removal routes for the largest machines.
  • Group machines that share utilities, and route pipes and ducts in interstitial spaces where possible.
  • Place in-process testing near the process to avoid travel through clean corridors.

Common mistakes

  • Fixing the building before the process and equipment list.
  • Undersizing warehouse, quarantine and QC areas.
  • Corridors that force clean and dirty flows to cross.
  • No space or utility capacity for expansion.
  • HVAC designed late, after room layouts are frozen.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 158 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Engineering services (31)

Adam Fabriwerk; Bectochem Consultant & Engineers Pvt. Ltd.; D.D. Enterprises; Fabtech Technologies International Ltd.; GMP Technical Solutions Pvt Ltd; Praj HiPurity Systems Limited.; Propack Technologies Pvt Ltd; Snowbell Machines Pvt Ltd; Tofflon (India) Pvt. Ltd; Anvay Pharma Systems Pvt. Ltd.; Aspire India; Bio Pharm Engineering; Camfield Engineers; Centech Engineers Pvt. Ltd.; EMCO Engineering; Hexagon Product Development Pvt. Ltd.; Hyde Engineering + Consulting; Landsky Engineers Pvt. Ltd.; M K Teknology 1 Pvt. Ltd.; MRC Systems FZE; Orbit Technologies Pvt. Ltd.; Parth Engineers & Consultant; Pharmatech Engineering Company; Pharmintech Turnkey Solutions Pvt Ltd; Pratham Technologies Pvt. Ltd.; Rihim Pharma Consultancy Pvt. Ltd.; Skytech Systems (India) Pvt.Ltd.; SMMS Engineering Systems Pvt. Ltd.; SpectrumPharmaTECH Consultants Pvt. Ltd.; SRJ Engineers Pvt. Ltd.; Vishva Protech Pvt. Ltd..

Open the full entries: Engineering and validation services list filtered to engineering services · Sterile, injectable and liquid equipment list filtered to engineering services · Water and utilities list filtered to engineering services · Cleanroom, HVAC and containment list filtered to engineering services

Cleanroom, HVAC and containment (31)

Airtech Systems India Pvt. Ltd.; Gandhi Automations Pvt. Ltd.; GMP Technical Solutions Pvt Ltd; A.C. Humidin Air Systems Pvt. Ltd.; Aastha Cleanroom Systems Private Limited; Ace Hygiene Product Pvt Ltd (Alfaa UV); Bry-Air (Asia) Private Limited; Camfil Air Filtration India Pvt. Ltd.; Clean Coats Pvt. Ltd.; Contec Airflow Pvt. Ltd.; Esco Biotech Pvt. Ltd.; Freudenberg Gala Household Product Pvt Ltd; Hvax Technologies Pvt. Ltd.; Idealin Fogging Systems; Industrial Equipwash Inc; Integrated Cleanroom Technology Pvt. Ltd.; Khimsaria Associates; Khosla Profil Pvt. Ltd.; Kleantech Engineering Systems Pvt. Ltd.; Lindstrom Services India Pvt Ltd; Moreschi Asia Doors P Ltd; Nicomac Clean Rooms Far East Pvt Ltd; Nilfisk India Pvt Ltd; Pharma Air Modular System; Radiant Enterprise; Russair Technologies Pvt. Ltd.; Sanosil Biotech Pvt. Ltd.; Shree Aerodynamic Products; Suntec Teknopak Cleanrooms & Containments; Synergy Thrislington; Ultramax Hydrojet Pvt Ltd.

Open the full entries: Cleanroom, HVAC and containment list

Water and utilities (13)

Christ Nishotech Water Systems Pvt Ltd; Hydropure Systems Pvt. Ltd.; Praj HiPurity Systems Limited.; Sainath Boilers; Aquamech Engineering Corporation; CQM Raj Enviro India Private Limited; Energy Plus; Enviro Technologies; Indu IonPure India Pvt. Ltd.; Rehoboth Enviro Systems; Sanpure Systems Pvt Ltd; Wab India Pvt. Ltd.; Wuhan ZHSB Environmental Technology Co, Ltd..

Open the full entries: Water and utilities list

Lab and analytical (85)

Agilent; Amkette Analytics Ltd; Electrolab India Pvt Ltd; Newtronic Lifecare Equipment Pvt Ltd; Shimadzu Analytical (I) Pvt Ltd; Thermolab Scientific Equipments Pvt Ltd; A.T.E. Enterprises Private Limited; Abdos Labtech (P) Ltd.; Ablaze Glass Works Pvt. Ltd.; ACZET PVT LTD; Aditya Scientific; Amar Equipments Pvt Ltd; Analab Scientific Instruments Pvt Ltd; Analytical Technologies Ltd; Anatek Services Pvt Ltd; Anton Paar; Apex Chromatography Pvt. Ltd.; Beckman Coulter India Pvt. Ltd.; Borosil Glass Works Ltd.; BRAND Scientific Equipment Pvt. Ltd.; BRK Instruments India LLP; Central Drug House; Central Drug House (P) Ltd.; Chemsynth Fine Chemicals (PureSynth Research Chemicals GmbH); Chiron Instruments (I) Pvt Ltd; Chromachemie Laboratory Private Limited; Chromatopak Analytical Instrumentation (I) Pvt. Ltd.; Contech Instruments Ltd.; Daicel Chiral Technologies (India) Pvt Ltd; Elixir Scientific India Pvt Ltd; FABLAB Engineering India Pvt. Ltd.; First Source Laboratory Solutions; GD Lab Solutions Pvt. Ltd.; Goel Scientific Glass Works Ltd.; Hemochrom; HiMedia Laboratories Pvt Ltd; Horiba India Pvt. Ltd.; Humidity Technologies Pvt Ltd.; IKA India Pvt. Ltd.; Impact Labs Pvt Ltd and 45 more.

Open the full entries: Lab and analytical list

Frequently asked questions

What comes first: building design or equipment selection?

Process and equipment first. Room sizes, heights, grades and HVAC all depend on which machines go where.

Should OSD rooms be positive or negative pressure?

It depends on the product and risk. Negative rooms with airlocks contain dust; positive rooms protect the product. The WHO HVAC guideline for non-sterile products describes the options.

How much space should a warehouse take?

It varies, but warehouses, quarantine and QC are often undersized. Base the area on material volumes, pallet storage and the time materials wait for release.

Is through-wall installation worth the cost?

For presses, coaters and fillers it usually is, because maintenance can be done from a technical area without entering production rooms.

Related guides

Sources

  1. WHO GMP main principles (TRS 986, Annex 2), WHO
  2. WHO HVAC guidelines for non-sterile products, Part 2 (TRS 1019, Annex 2)
  3. EU GMP Annex 1 overview, NSF

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.