Buyer's guide · Sterile and injectables

Blow-Fill-Seal Machines for Ophthalmics and Respules

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Blow-fill-seal (BFS) machines extrude a plastic tube, mould it into containers, fill them with sterile product and seal them in one automated cycle of a few seconds. With no separate container washing or sterilisation and minimal human intervention, BFS suits high-volume, preservative-free unit doses such as eye drops and inhalation respules, and increasingly injectables. Published outputs reach about 33,000 to 37,500 containers per hour. BFS loses out for products incompatible with polyethylene or polypropylene, heat-sensitive products near the hot parison, very small batches, and drugs needing glass.

How BFS works

  1. Blow: polymer granulate (usually LDPE or PP) is melted and extruded as a parison into an open mould, which closes and forms the container by vacuum or air.
  2. Fill: a filling mandrel doses sterile-filtered product into the container inside a protected zone.
  3. Seal: the top is moulded closed, often with a twist-off or pierceable closure.
  4. Containers leave as strips or cards for deflashing, leak testing, inspection and packing.

EU GMP Annex 1 has a dedicated BFS section covering the critical zone, background environment, extrusion and qualification.

Output and container ranges

Example (Rommelag bottelpack)Published outputFill volume
bp 434up to 11,250/h0.1 to 30 ml
bp 460-15up to 29,000/h0.1 to 30 ml
bp 460-20up to 33,300/h0.1 to 20 ml
bp 461up to 25,000/h3 to 60 ml
Multi-dose ophthalmic systemsup to 12,000/hTypically 1 to 15 ml
Large volume bottlesup to about 9,200 to 10,000/h50 or 100 to 1,000 ml
Supplier's published figures; confirm current specifications.

When BFS beats conventional filling

  • High-volume unit-dose products: preservative-free eye drops, respules, nasal drops.
  • Products where breakage and glass particles are a concern.
  • Plants wanting to avoid buying, storing, washing and sterilising containers.
  • Small cleanroom footprint: the supplier states a line can need as little as about 7 m² of Grade C area.

When conventional filling is better

  • Products that interact with or permeate through polyolefins, or need glass.
  • Highly heat-sensitive biologics, unless the machine has validated cooling of the container.
  • Small, varied batches where mould changes and start-up waste dominate.

For eye drop lines generally, see our ophthalmic line guide.

Suppliers

Rommelag (bottelpack) is the best-known BFS machine builder; Weiler Engineering in the US and several Asian manufacturers also supply BFS machines, while CDMOs offer BFS filling as a service. Ask for mould lead times, polymer qualification data and media fill history.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 3 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Blow fill seal (3)

Brio Pharma Technologies Pvt Ltd; Indo German Pharma Engineers; Salesworth Synergies LLP.

Open the full entries: Sterile, injectable and liquid equipment list filtered to blow fill seal · Distribution, trade and services list filtered to blow fill seal

Frequently asked questions

What products are made with blow-fill-seal?

Mainly preservative-free eye drops, inhalation respules, nasal drops, small volume parenterals and large volume infusion bottles.

How fast are BFS machines?

Published outputs range from about 10,000 to more than 30,000 containers per hour depending on model and container size.

Is BFS considered aseptic processing?

Yes. BFS is an advanced aseptic process with its own section in EU GMP Annex 1 and requires media fills and environmental control.

Why is BFS often preferred for preservative-free unit doses?

It forms, fills and seals single-use containers without human contact, at high speed and with no container washing or sterilisation.

Related guides

Sources

  1. BFS engineering products, Rommelag
  2. Aseptic filling machines, Rommelag
  3. Blow-Fill-Seal solutions for pharma, Rommelag
  4. Blow fill seal, Wikipedia
  5. Ophthalmics: definition and aseptic filling, Rommelag

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.