A cream or ointment plant prepares a water phase and an oil (wax) phase in separate heated vessels, typically at about 70 to 80 °C, transfers them under vacuum into a vacuum homogeniser mixer where they are emulsified, homogenised and cooled, then holds the bulk in storage vessels before tube or jar filling. The core equipment is the water phase vessel, wax phase vessel, vacuum homogeniser with anchor stirrer and high shear turbine, transfer pumps, storage vessels, a tube filling and sealing machine and cartoner, supported by purified water, heating, cooling and CIP.
Process flow
- Dispensing of oils, waxes, emulsifiers, actives, preservatives.
- Water phase: purified water with water-soluble ingredients heated and mixed (often about 70 to 80 °C).
- Oil phase: oils, waxes and emulsifiers melted and mixed at similar temperature.
- Emulsification: phases transferred under vacuum into the main mixer; high shear homogeniser forms the emulsion.
- Cooling and additions: controlled cooling with slow scraping stirrer; actives, fragrances or heat-sensitive ingredients added at lower temperature.
- Deaeration under vacuum to remove trapped air.
- Storage in holding vessels; sampling and release.
- Filling into tubes or jars, coding, cartoning.
Equipment checklist
| Equipment | Key features |
|---|---|
| Water phase vessel | Jacketed, stirrer, temperature control |
| Oil (wax) phase vessel | Jacketed, stirrer, melting capacity |
| Vacuum homogeniser mixer | Contra-rotating anchor with scrapers, high shear turbine (up to about 3,000 rpm), vacuum, jacket for heating and cooling, tilting or bottom discharge |
| Transfer system | Vacuum transfer or sanitary lobe pumps, sanitary piping |
| Storage vessels | Jacketed, with slow stirrer where needed |
| Tube filling and sealing | Heated hopper with stirrer; hot air or fold sealing; see our tube filler guide |
| Jar filling (optional) | Piston filler and capper |
| Cartoner and coder | Leaflet insertion, batch coding, serialization if required |
| Utilities | Purified water, hot water or steam, chilled water, vacuum, CIP |
| QC | Viscometer, pH meter, assay, microbial limits testing |
Key controls
- Phase temperatures and addition order, which decide emulsion stability.
- Homogeniser speed and time, which set droplet size and viscosity.
- Cooling rate and the temperature at which actives are added.
- Vacuum level to avoid air entrapment.
- Microbial control: purified water quality, preservative system, cleaning and hold times.
- Content uniformity for suspended actives.
Companies listed in the Hello Pharma supplier directory
The Hello Pharma supplier directory lists 41 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.
Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.
Reactors and vessels (16)
Adam Fabriwerk; D.D. Enterprises; GMM Pfaudler Ltd.; Praj HiPurity Systems Limited.; Propack Technologies Pvt Ltd; S.K. Pharma Machinery Pvt Ltd; Shiv Shakti Process Equipment Pvt. Ltd.; Standard Group of Companies, Hyderabad; Amar Equipments Pvt Ltd; Chemi Plant Engineering Company; Hugopharm Technologies Private Limited; Linyi Haixin Chemical Equipment Co, Ltd; Pharma Chem Machineries; SA Tournaire; Sheth Fabricators Pvt. Ltd.; Vats & Vessels (I) Pvt Ltd.
Open the full entries: Process plant equipment list filtered to reactors and vessels · Sterile, injectable and liquid equipment list filtered to reactors and vessels · Water and utilities list filtered to reactors and vessels · Lab and analytical list filtered to reactors and vessels
SS fabrication (26)
Swiss Engineering Pvt Ltd; Allyone Industries; Chemi Plant Engineering Company; Cintex Industrial Corporation; Darshana Industries Pvt. Ltd.; G T Metals & Tubes; HLE Engineers Pvt. Ltd.; Hugopharm Technologies Private Limited; Kaps Engineers; Kinam Engineering Industries; Komal Industries; Mistry Engineering; N. K. Industries; Neptune Industries; Pharma Fab Industries; Shah Brothers; Shefa Industries; Sheth Fabricators Pvt. Ltd.; Sterinox Systems; Taskar Engineering; Tex Mech Engineers; Trimech Engineers Pvt. Ltd.; Universal Orbital Systems Pvt. Ltd.; Vats & Vessels (I) Pvt Ltd; Vishwakarma Industries; Vyanktesh Fabricraft Pvt. Ltd..
Open the full entries: Process plant equipment list filtered to ss fabrication · Oral solid dosage equipment list filtered to ss fabrication
Tube filling (3)
Allpharm Technologies; Parle Global Technologies Pvt. Ltd.; Roop Telsonic Ultrasonix Ltd..
Open the full entries: Packaging machinery list filtered to tube filling · Oral solid dosage equipment list filtered to tube filling
Frequently asked questions
What is the main machine in a cream plant?
The vacuum homogeniser mixer, which combines a slow scraping anchor stirrer, a high shear homogeniser and vacuum to emulsify, mix and deaerate the cream.
At what temperature are cream phases mixed?
Commonly around 70 to 80 °C for oil and water phases, though each formulation defines its own temperatures.
Why is vacuum used?
Vacuum transfers phases between vessels and removes air from the cream, preventing bubbles, oxidation and fill weight problems.
Can a small plant use one vessel for everything?
Small or semi-automatic plants sometimes prepare phases in the same vessel, but separate water and oil phase vessels give better control and capacity.
Related guides
Sources
- Production of pharmaceutical creams and ointments, Silverson
- Cream manufacturing equipment explained, Pharma Now
- Vacuum homogenizer for creams and ointments, Making.com
- SOP for preparation of oil-in-water creams, PharmaSOP
- How to manufacture ointments, Making.com
This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.
