Guide · Compliance and validation

ATEX-Compliant Pharma Machines for Solvent Areas

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Where flammable solvents or combustible dusts can form explosive atmospheres, the plant must classify zones (gas Zones 0, 1, 2; dust Zones 20, 21, 22) and use equipment of the matching ATEX category: Category 1 for Zone 0 or 20, Category 2 for Zone 1 or 21, Category 3 for Zone 2 or 22. Equipment carries the Ex hexagon and a marking such as II 2G. In pharma this affects solvent coating pans, fluid beds, granulators, mills and dust collectors, which may also need explosion venting, suppression or pressure-shock-resistant design.

Zones and equipment categories

Gas zoneDust zoneExplosive atmosphereMinimum equipment category
Zone 0Zone 20Present continuously or for long periodsCategory 1 (II 1G / II 1D)
Zone 1Zone 21Likely in normal operation, occasionallyCategory 2 (II 2G / II 2D)
Zone 2Zone 22Unlikely, or only for short periodsCategory 3 (II 3G / II 3D)

Directive 2014/34/EU, mandatory since 20 April 2016, covers the equipment; the workplace directive covers the employer's zoning and risk assessment.

Where ATEX matters in pharma

  • Solvent film coating: coater interior and exhaust can be classified zones; see coaters.
  • Fluid bed processing with solvents or fine dusts: explosion protection by pressure-shock-resistant design, venting, suppression or inerting; see fluid beds.
  • Integrated granulator and dryer lines: explosion isolation between connected units.
  • Milling, sifting, dust collection and powder transfer: dust zones.
  • Solvent dispensing and storage rooms.

Buyer checklist

  1. Get the hazardous area classification for each room and the inside of equipment.
  2. Specify required category, gas group and temperature class (for example II 2G IIB T4).
  3. Ask for the EU Declaration of Conformity and, for Category 1 and 2 electrical equipment, notified body certificates.
  4. Check non-electrical equipment (motors, fans, mechanical parts) is also covered.
  5. Confirm explosion protection concept for process equipment: containment, venting, suppression, isolation.
  6. Consider aqueous processes instead of solvents to avoid zones altogether.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 79 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Process plant equipment (50)

GMM Pfaudler Ltd.; IDEX Fluid & Metering Pvt. Ltd.; Sanbij Impex Pvt Ltd; Sawant Filtech Pvt. Ltd.; Shiv Shakti Process Equipment Pvt. Ltd.; Standard Group of Companies, Hyderabad; Swiss Engineering Pvt Ltd; Allyone Industries; Apurva India Pvt. Ltd.; ATR Asahi Glass process systems Pvt. Ltd.; Busch Vacuum India Pvt Ltd; Chemi Plant Engineering Company; Cintex Industrial Corporation; Cipriani Harrison Valves Pvt Ltd; Condot System Pvt Ltd; Darshana Industries Pvt. Ltd.; DHV Fiting Pvt. Ltd.; Flocon Industries; Fristam Pumps India Pvt. Ltd.; G T Metals & Tubes; HRS Process Systems Limited; Hugopharm Technologies Private Limited; Kaps Engineers; Kinam Engineering Industries; Komal Industries; Linyi Haixin Chemical Equipment Co, Ltd; Mascon Techneeds; Mistry Engineering; N. K. Industries; Neptune Industries; Nupore Filtration Systems Pvt. Ltd.; Pharma Chem Machineries; Pharma Fab Industries; Piab Vacuum Technology Pvt. Ltd.; RGS Vacuum Solutions Pvt. Ltd.; SA Tournaire; Shah Brothers; Shefa Industries; Sheth Fabricators Pvt. Ltd.; Sterinox Systems and 10 more.

Open the full entries: Process plant equipment list

Automation and controls (29)

Accupack Engineering Pvt Ltd; Adam Fabriwerk; A.S. Automations; Appidi Technologies Pvt. Ltd.; Avcon Controls Pvt. Ltd.; B&R Industrial Automation Pvt. Ltd.; B.D. Industries; Crystal Automation Pvt. Ltd; Electronics Devices Worldwide Pvt Ltd; Elektrocraft (India) Pvt. Ltd.; Hilda Automation; Inline Technologies; Jay Instruments & Systems Pvt Ltd; Kesar Control Systems; MICROCON; Millenia Technologies; Mitsubishi Electric India Pvt Ltd.; Ngen Controls System; Nord Drivesystems Pvt Ltd; P.M Electro Auto Pvt. Ltd; PRETECH Automation Pvt. Ltd.; Protech Technologies Pvt. Ltd.; Radix Electrosystems Pvt. Ltd.; Saksham Technologies Pvt. Ltd.; Shubham Automation Pvt. Ltd.; Sierra Instrumentation & Controls; Staubli Tec Systems India Pvt Ltd; Sunjay Technologies Pvt Ltd; Toshniwal Instrument Mfg.Pvt.Ltd.

Open the full entries: Automation, inspection and serialization list filtered to automation and controls · Packaging machinery list filtered to automation and controls · Components and spares list filtered to automation and controls · Sterile, injectable and liquid equipment list filtered to automation and controls

Frequently asked questions

What does II 2G mean on equipment?

Group II (non-mining), Category 2, for gas atmospheres: suitable for Zone 1 and Zone 2 areas.

Which pharma processes need ATEX equipment?

Solvent-based coating and granulation, fluid bed processing of fine powders, milling, sifting, dust collection and solvent handling areas.

Is ATEX required outside the EU?

ATEX is EU law. Other regions use IECEx or national schemes based on the same IEC standards; many buyers specify ATEX or IECEx.

Can aqueous coating avoid ATEX?

Often, for the solvent risk, but combustible dust zones may still exist in powder handling.

Related guides

Sources

  1. ATEX directive, Wikipedia
  2. ATEX zones, equipment and compliance guide, HSE Blog
  3. ATEX labelling: groups and categories, Palazzoli
  4. ATEX guide, Danish Technological Institute
  5. Gral and UltimaGral explosion testing of integrated systems, GEA

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.