Guide · Compliance and validation

Validating a Capsule Filling Machine: Protocol Walkthrough

By the Hello Pharma Editorial Team · Last updated 19 November 2026 · 3 min read

Short answer

Capsule filler validation follows IQ (installed correctly with documents, materials, utilities and software), OQ (every function works across its operating range, including speeds, dosing adjustments, sensors, rejects and data integrity) and PQ (consistent production with your product: fill weight, weight variation, closed length, defects and uniformity over representative runs). Base acceptance criteria on product specifications and pharmacopoeial tests, and challenge every reject system.

Installation qualification (IQ)

  • Machine matches approved design and purchase order; serial and model checked.
  • Drawings, manuals, spare parts list and change parts inventory present.
  • Material and surface finish certificates for contact parts.
  • Utilities: power, compressed air quality, vacuum, dust extraction connected and verified.
  • Instruments calibrated: load cells, sensors, timers.
  • Software version, backup and user configuration recorded.

Operational qualification (OQ)

TestWhat to verify
Speed rangeMachine runs stably at minimum, normal and maximum speeds
Capsule handlingRectification, separation and closing for each capsule size
Dosing adjustmentDosing disc or dosator settings change fill weight predictably
Sensors and rejectsNo capsule, no fill; unseparated capsules; weight rejects; reject confirmation
Weight controlStatistical or 100% weighing system accuracy with reference weights
Alarms and interlocksDoors, emergency stop, low powder, vacuum loss
Data integrityUser levels, audit trail, batch report, backup

Performance qualification (PQ)

  1. Run commercial-size batches (commonly three) with the actual product, or a justified number of runs.
  2. Sample across the run: start, middle, end, after stops and refills.
  3. Test fill weight and weight variation against specification and pharmacopoeial limits.
  4. Check closed length, appearance defects (dents, splits, telescoping) and yield.
  5. Confirm content uniformity where required.
  6. Review rejects and stoppages to show the process is stable.

Common pitfalls

  • OQ done with empty capsules only, missing dosing performance.
  • No challenge of reject systems with deliberately defective capsules.
  • PQ sampling only at steady state, missing start-up and after stops.
  • Change parts for some sizes not qualified.
  • Software changed after OQ without change control.

See also supplier documents and choosing a capsule filler.

Companies listed in the Hello Pharma supplier directory

The Hello Pharma supplier directory lists 19 companies relevant to this guide, grouped below by machine type or category. Each name links to the company's directory entry, with a description, technologies, location and website. Companies confirmed against their websites or public listings appear first in each group.

Inclusion is not an endorsement or ranking. Many categories are inferred from company names and segments, so confirm capabilities, approvals and service reach directly with each supplier. Search all 1,232 companies.

Capsule filling (6)

ACG Worldwide Solid Dosage Consumables and Machinery; Karnavati Engineering; Koroth Systems Pvt. Ltd.; Solace Engineers (Mktg) Pvt. Ltd.; Prasad Meditech; S.G. Pharmatec.

Open the full entries: Oral solid dosage equipment list filtered to capsule filling

Validation services (13)

Airtech Systems India Pvt. Ltd.; Bliss-ca Technologies; D.D. Enterprises; Salesworth Synergies LLP; Thermolab Scientific Equipments Pvt Ltd; Autocal Solutions Pvt. Ltd.; Hyde Engineering + Consulting; June Enterprises Pvt Ltd.; Metina Pharmconsulting Private Limited; Pratham Technologies Pvt. Ltd.; Sergusa Solutions Pvt. Ltd.; SpectrumPharmaTECH Consultants Pvt. Ltd.; TechnoValue Solutions Pvt Ltd.

Open the full entries: Engineering and validation services list filtered to validation services · Lab and analytical list filtered to validation services · Packaging machinery list filtered to validation services · Cleanroom, HVAC and containment list filtered to validation services

Frequently asked questions

What is tested in OQ for a capsule filler?

Speed range, capsule handling for each size, dosing adjustment, sensors and reject functions, weighing accuracy, alarms, interlocks and data integrity features.

How many PQ batches are needed?

Commonly three, but the number should be justified by risk and product knowledge.

Should reject systems be challenged?

Yes. Deliberately defective or missing capsules should be fed to prove each reject works and is confirmed.

Do all capsule sizes need qualification?

Each size and change part set to be used should be covered in OQ, and PQ should cover the products and sizes in use.

Related guides

Sources

  1. EU GMP Annex 15 qualification and validation, European Commission
  2. Qualification vs validation, GMP Insiders
  3. Pharmaceutical equipment qualification and control system validation, Rephine
  4. ADAPTA capsule filling (weight control features), IMA

This guide is general information to support decisions and is not engineering, validation or regulatory advice for a specific project.

Ready to read pharma differently?

Join the Hello Pharma community for editorial, intelligence and engineering reference from pharma manufacturing.